Antenna snapped in half HELP

[solidpain]

Ok got my T-Maxx 3.3 with a Picco .28 today after the break in i thought i try it out at full speed and on a turn i put the breaks on to get the truck to turn and as i did the truck did acouple spins and somehow snapped the Antenna is there a way to add to whats left or replace the wire???:bow:

 

[Rolex]

It's never wise to just do a quick splice since it might lead to a bigger problem eventually. Your best bet is to pick up a new one at the LHS and solder it into the receiver.
That's the permanent fix, and it will end any other worries.

 

[beason]

if its the antenna on the truck, they are pretty specific about the length with the stock systems. you can get a new wire from tower or the lhs pretty cheep. then its just a matter of taking the rx apart and soldering on the new one..

its pretty simple if you have basic soldering knowledge.

 

[solidpain]

if its the antenna on the truck, they are pretty specific about the length with the stock systems. you can get a new wire from tower or the lhs pretty cheep. then its just a matter of taking the rx apart and soldering on the new one..

its pretty simple if you have basic soldering knowledge.

Ok thx i have lots or soldering know now so i hope ill be ok

 

[GH Racing]

you should get a new wire

 

[Brushlessboy]

A Picco .28 in a Tmaxx. The antenna wire is an easy fix, wait for future developments, it'll be painfull......