• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Another FLM Extended build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Buggy's kinda been on hold as some of the smaller parts have come in. I had a problem with the combo bulks. The 4908 differential would fit completely in (bearings too big). After talking to FLM today, the bulks that I have are for an older version of the T-maxx. They're going to exchange them for the correct ones. Anyone try their hybrid bulks? This might be a good time to upgrade since they'll accepts 1/8 buggy diffs.
 
just_visiting said:
Buggy's kinda been on hold as some of the smaller parts have come in. I had a problem with the combo bulks. The 4908 differential would fit completely in (bearings too big). After talking to FLM today, the bulks that I have are for an older version of the T-maxx. They're going to exchange them for the correct ones. Anyone try their hybrid bulks? This might be a good time to upgrade since they'll accepts 1/8 buggy diffs.
Click to expand...
I would really like to have the hybrid bulks but I went the cheap way out with the FLM diff cups and gears with the standard FLM bulkheads. All for a good price either off the forum here or E-bay. I have the Picco Max and they have stood up to it pretty well so far. Only problem I have had is with drive shafts.....even the 3.3 Revo shafts are breaking on me so I have some CVDs coming. I am going to get Racer1966 to put pins in the one end for the brake disc. I have a short 2.5 Maxx with a new factory FO tranny. So the only CVDs I can get to fit are the short 2.5 style. But they all have the Hex style brake not pins like the 3.3. So again i have to rig something up....lol. Good times.
 

RC Builds

Back
Top