Anotha picco 26 ??????

[Bigdoged12]

Wanna get a picco 26 but heres the.prob....

I wanna run a trinity side pipe set up but what do I gotta do to make the manifold seal to the engine exhaust port correctly?

Part names and how to please

 

[MudWild680]

Umm...hm



You buy the exhaust you want, an exhaust gasket, set of manifold springs if it doesn't come with any, mount the exhaust up and build your exhaust hanger to match where your pipe is.

 

[2revo1maxx]

If your trinity header is made for a 3.3, or sb sized, then cut off a piece of revo exhaust stinger and use that for a gasket.

 

[Bigdoged12]

I'm coming from a all.savage back round so bare with me...

If I run a BB exhaust manifold to a small/mid exhaust port off the picco 26 wont the port be to.small for the 21 size rubber seal? I've done alot of googling before I posted....people said they were running 2, one small/mid with a 21 over it for the bb trinity set up to work....i.have 21 size seals were can I find sb/mb one and will this idea work properly? Or like was ststed cut a peice off the stinger and put the 21 gasket over it


Also you mention a 3.3 trinuty exhaust manifold.....do they make a side exhaust one and will it work on a bb exhaust?

 

[2revo1maxx]

The picco exhaust port is actually a wee bit smaller than a small block exhaust port like the 3.3. If you have a bb or 1/8th scale exhaust then you will need an adapter. I think Oomp has them.