AE.MGT. shift point .2 spd.

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

cbaker65

RCTalk VIP
Messages
6,252
Reaction score
3,665
Location
Kern county ,Calif.
Here is a vid on where the spot is for adjusting the shift point on a 2 spd transmission on
an AE.MGT truck!

 
excellent video and description! thank you for posting it!

Yea ,was just showing how you have to expose the set screws through the gear an that
it has to be rotated separate to line the window up with the screws on the pawl hub!
It is much easier when the wheels are on the ground so you can just rotate the spur
gear buy hand until the gear window is exposed ,then push the truck on the ground
while holding the spur still ,until the screws line up to the window ,there would be 2
set screws close together ,the screw that tightens the hub is more in an upright position ,
the screw that sits side ways is the adjustment screw an should only be turned about 1/16
to an 1/8 turn at a time!...:cool:
 

Similar threads

I
Replies
4
Views
234
easy rider
E
revoregg
Replies
3
Views
286
revoregg
revoregg
>BD
Replies
4
Views
315
WickedFog
WickedFog
tudordewolf
Replies
15
Views
2K
tudordewolf
tudordewolf
bonezMGT 8.0
Replies
7
Views
382
bonezMGT 8.0
bonezMGT 8.0
Back
Top