I have been showing my scx10 some love by breaking it completely down for a good cleaning and fresh lube and decided to give it a face lift. First thing was to permanently join the bed and cab, it has been held together with a brace that was glued with two part epoxy. Every now and then I have to repair it until now....
Drilled a couple of holes
Used a cone bit that came with the dremel to countersink the hole, added screw and nut with locktite! The holes will be filled before paint.
Once that was taken care of I decided to make a bed cover
Lots of sanding, primer, and paint still to come.
Drilled a couple of holes
Used a cone bit that came with the dremel to countersink the hole, added screw and nut with locktite! The holes will be filled before paint.
Once that was taken care of I decided to make a bed cover
Lots of sanding, primer, and paint still to come.
