• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

3.3 ez strater

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
J

joshwa

RC Newbie
Messages
11
Reaction score
0
Points
0
RC Driving Style
  1. Bashing
  2. Racing
do they make a steel gear for the 3.3 ezstart that goes around the one way bearing ?
 
i am beginning to think the ezstart is junk any advice on why my ezstart just goes one time bump? then the led on the ezstart igniter goes to glow plug ? i took it out it gets its orange glow but it makes no attempt to turn over , this is on my t maxx 2.5 with a 3.3 upgrade by the way any advice would be great thanks
 
the ez start is junk thats all it is to it, i went to pull start for all my engines i would advise to do the same if you buy a trx 3.3 they should come with the pull start i would leave it go to the hobby shop and get the dynamite metered glow igniter for 20 bucks and call it a day if you dont have the pull start go to ebay and pick one up for 10 bucks
 
the problem might be the wand I have noticed after a while the prongs dont line up and they dont make contact sometimes alittle wiggle while you are trying to start helps or just a new wand... I have e-z start on most of my traxxas still and the ones I have mad pull start bust up the nuckles pretty good. I beleive I have seen steel gears for the e-z start but I really dont think you need them to be steel.
 

RC Builds

Back
Top