2055 throttle servo cable ripped out.

[Revo3.3Racer]

Hey everybody I bashed my revo last weekend at the sandput and the track in wolcott. I got home to go to the sandpit again and i was giving full throttle and the servo was twitching. I finally got some time today to take a look at it, i took it out and BAM! the cable was loose inside and when i took it out it ripped out.

The question is How do i fix it? which cable goes where ? i know how to solder stuff i just dont know where the cables

I made some diagrams below ,PLEASE help me out or at least try i dont want to buy a new servo since this one is good only the cables are ripped out.


help me out please :]


In the pictures match the wires numbers to each other.

 

[liftedcj7on44s]

ok looking at your second picture its like this
The top wire is black
The middle wire is Red
the bottom wire is White

 

[Revo3.3Racer]

THANKS BRO !!!! you saved me 40 bucks. thank you so much

 

[bike]

Same problem happened to me last week. Soldered them back in, and was back in action!

 

[liftedcj7on44s]

THANKS BRO !!!! you saved me 40 bucks. thank you so much

No problem. I happen to have an old 2055 laying here ripped open i stole parts out of. But glad you got it working.

 

[big jilm]

Same problem here... Looks like there is not enought wire.. It's tight when mounted... I have one in the revo working and now I can fix the spare using your instructions... Thanks....

 

[liftedcj7on44s]

No problem.

 

[Revo3.3Racer]

UPDATE!!!! I soldered them back in yesterday and it didnt work. i tried it the other way around and it works.

So its

white
red
black

not

black
red
white

 

[liftedcj7on44s]

I'm only human

 

[big jilm]

I'm only human