FYI I am willing to trade one or both for the right offroad Nitro vehicle and/or good FM radio gear. Don't hesitate to make an offer. I have pictures of both.
Custom second generation Clodzilla chassis with cantilever suspension, all aluminum.
Features:
- 4 wheel drive
- 4 wheel steering
- 6'' of articulation
Standard stuff:
- Novak EVX speed control
- Two 550size Reedy 19T single motors (one per axle)
- 2 FMA high torque metal gear ball bearing servos (one per axle)
- 4 new 1900Mha battery packs (7.2v)
- Basic AM radio with dual rate, servo switching, etc...
- Associated aluminum shocks
- Integy 16x2 charger with multiple charge and discharge features
- Lots of extra parts
- Bearings all around
- Dark purple multi tone Durango body
Custom stuff (I'm a machinist)
- 1/4'' Square aluminum bumper/servo mounts for both axles
- Machined aluminum motor mount/heatsinks
- Custom dual battery pack holder
- Sealed & vented esc box
- Aluminum center skid plate
- Machined aluminum cantilever suspension setup
- All aluminum steering linkage
- Aluminum antenna mount
Asking $525.00cdn obo
EVERYTHING purchased and built in 2003. The truck has only been run about 15 times or so. All the electronics are new and in new condition and I have all the receipts and warranty info. It currently runs beautifully and can be run upon receipt. This truck is pretty fast and has tons of torque. I also have a bunch of extra parts.
Asking $525.00cdn obo See it at:
www.rcuniverse.com/market/item.cfm?itemID=6147
Traxxas Stampede/Rustler for sale
Purchased new as a Stampede but upgraded as a Rustler (Stampede chassis). All instructions and manuals included. Everything is in very good condition ie. No broken or missing parts etc… This truck is ready to run and fun to run. All of the best upgrades included. Every thing runs very well and has been taken care of. This was not my first RC truck.
List of upgrades:
-Duratraxx Blast ESC
-FMA metal gear high torque ball Bearing servo
-Yokomo 21turn single motor
-Full Boca bearing set
-Trinity aluminum hinge pin brace
-Slipper clutch
-MIP shiny cvd’s
-RPM Large bearing front carrier
-Turnbuckle camber links front/back
-HD servo saver
-Acer racing high flow plugs
-Pro line body
-Rpm Talonz rims, 3 sets
-Set each of Proline Track-Ta-Gator and Gladiator off road tires
-Set of Team Losi ribbed front tires
-Trinity aluminum motor mount heat sink
-Aluminum motor mount plate
Also comes with:
-Original body
-Original rims and Stampede monster truck tires
-Bags and bags of spare parts: Bearings, Spur gears, Pinions, Body mounts, Servo gear, original parts, Paint, etc, etc….
-15 & 30 wt Associated shock oil
-Tire CA glue
-Plus other stuff
-Original motor and new EPIC stock motor
-Super Brain 809 auto peak charger
-Futaba Magnum Junior pistol grip radio
-Two Sanyo 1700 6cell stick packs
Asking $350cdn obo See it at:
http://www.rcuniverse.com/market/item.cfm?itemID=10506
Custom second generation Clodzilla chassis with cantilever suspension, all aluminum.
Features:
- 4 wheel drive
- 4 wheel steering
- 6'' of articulation
Standard stuff:
- Novak EVX speed control
- Two 550size Reedy 19T single motors (one per axle)
- 2 FMA high torque metal gear ball bearing servos (one per axle)
- 4 new 1900Mha battery packs (7.2v)
- Basic AM radio with dual rate, servo switching, etc...
- Associated aluminum shocks
- Integy 16x2 charger with multiple charge and discharge features
- Lots of extra parts
- Bearings all around
- Dark purple multi tone Durango body
Custom stuff (I'm a machinist)
- 1/4'' Square aluminum bumper/servo mounts for both axles
- Machined aluminum motor mount/heatsinks
- Custom dual battery pack holder
- Sealed & vented esc box
- Aluminum center skid plate
- Machined aluminum cantilever suspension setup
- All aluminum steering linkage
- Aluminum antenna mount
Asking $525.00cdn obo
EVERYTHING purchased and built in 2003. The truck has only been run about 15 times or so. All the electronics are new and in new condition and I have all the receipts and warranty info. It currently runs beautifully and can be run upon receipt. This truck is pretty fast and has tons of torque. I also have a bunch of extra parts.
Asking $525.00cdn obo See it at:
www.rcuniverse.com/market/item.cfm?itemID=6147
Traxxas Stampede/Rustler for sale
Purchased new as a Stampede but upgraded as a Rustler (Stampede chassis). All instructions and manuals included. Everything is in very good condition ie. No broken or missing parts etc… This truck is ready to run and fun to run. All of the best upgrades included. Every thing runs very well and has been taken care of. This was not my first RC truck.
List of upgrades:
-Duratraxx Blast ESC
-FMA metal gear high torque ball Bearing servo
-Yokomo 21turn single motor
-Full Boca bearing set
-Trinity aluminum hinge pin brace
-Slipper clutch
-MIP shiny cvd’s
-RPM Large bearing front carrier
-Turnbuckle camber links front/back
-HD servo saver
-Acer racing high flow plugs
-Pro line body
-Rpm Talonz rims, 3 sets
-Set each of Proline Track-Ta-Gator and Gladiator off road tires
-Set of Team Losi ribbed front tires
-Trinity aluminum motor mount heat sink
-Aluminum motor mount plate
Also comes with:
-Original body
-Original rims and Stampede monster truck tires
-Bags and bags of spare parts: Bearings, Spur gears, Pinions, Body mounts, Servo gear, original parts, Paint, etc, etc….
-15 & 30 wt Associated shock oil
-Tire CA glue
-Plus other stuff
-Original motor and new EPIC stock motor
-Super Brain 809 auto peak charger
-Futaba Magnum Junior pistol grip radio
-Two Sanyo 1700 6cell stick packs
Asking $350cdn obo See it at:
http://www.rcuniverse.com/market/item.cfm?itemID=10506
