Metalhead Matt
RCTalk VIP
I just can't get into nitro. Too much of a hassle for the once or twice a week I drive my rc's. Here's what they involve:
2.5 Maxx
Aluminum rear bulk
foc
new clutch and brake hex installed
4908 outer shafts and carriers
Needs a body, rx box and front skid. I have the front tied together with some old pede links so it's stout and drivable and the rx is double side taped in place. Engine runs good, but is getting tired. Could use a pinch or a trade in. Would make a great winter engine. Needs 2 shocks also. Stock tires. I have a male trx connector on the ez start motor wires. I have another harness and wand. I figure this truck to be worth $75.
2.5r Revo
New Ths pipe and header
New Motor Saver filter
foc
Wing installed
I have some lt rockers, stock pipe and header, spare rear bulk, some springs and other assorted bits and pieces. This engine has a ton of pinch. Banjo fitting needs sealed. I'll be happy to do it, or somebody may be interested in sealing the whole engine them selves. Lsn adjusts it self a tad; needs some green slime or Vaseline. It's a breeze to pop the engine off of a revo. You can take the engine out without even messing with the mesh. Missing the back half of the body. Covers right to the roll bar, where I put a screw in it to hold it in place. Looks kinda cool with the wing and the engine gets plenty of air.
I figure this Revo to be worth $150.
Both come with stock tx's and stock tires. No ignitor.
Local inquiries only. I'm not messing around with shipping these things. I can't post pics, so if you wanna see 'em and drive 'em, come on over.
I'm interested in anything electric. Brushless system for a pede. Nimh batteries. 4x4 roller with esc/motor preferably. I don't care if it's brushed. Hit me up with some offers. As I stated, I want anybody to feel free to come over and take these rigs for a spin to make sure they are what you want. They run good, tune right in and do what they are supposed to.
2.5 Maxx
Aluminum rear bulk
foc
new clutch and brake hex installed
4908 outer shafts and carriers
Needs a body, rx box and front skid. I have the front tied together with some old pede links so it's stout and drivable and the rx is double side taped in place. Engine runs good, but is getting tired. Could use a pinch or a trade in. Would make a great winter engine. Needs 2 shocks also. Stock tires. I have a male trx connector on the ez start motor wires. I have another harness and wand. I figure this truck to be worth $75.
2.5r Revo
New Ths pipe and header
New Motor Saver filter
foc
Wing installed
I have some lt rockers, stock pipe and header, spare rear bulk, some springs and other assorted bits and pieces. This engine has a ton of pinch. Banjo fitting needs sealed. I'll be happy to do it, or somebody may be interested in sealing the whole engine them selves. Lsn adjusts it self a tad; needs some green slime or Vaseline. It's a breeze to pop the engine off of a revo. You can take the engine out without even messing with the mesh. Missing the back half of the body. Covers right to the roll bar, where I put a screw in it to hold it in place. Looks kinda cool with the wing and the engine gets plenty of air.
I figure this Revo to be worth $150. Both come with stock tx's and stock tires. No ignitor.
Local inquiries only. I'm not messing around with shipping these things. I can't post pics, so if you wanna see 'em and drive 'em, come on over.
I'm interested in anything electric. Brushless system for a pede. Nimh batteries. 4x4 roller with esc/motor preferably. I don't care if it's brushed. Hit me up with some offers. As I stated, I want anybody to feel free to come over and take these rigs for a spin to make sure they are what you want. They run good, tune right in and do what they are supposed to.
