Well here goes. I think i am finally done. Work, kid on the way and just life in general is taking up every spare moment. Here is a chance to grab a nice crawler package thats ready to go. Here are the specs.
Axial Axles
SWX chassis
CAC aluminum beadlocs with rovers
TCS 4 link uppers on the front and rear
Mamba Max
Castle BEC
Futaba S9351 Steering Servo
Spektrum SR3000
CKRC 3S 1500mah Lipo
Venom blinky lipo charger. (cheap but works)
JP Custom RC 35T Warrior R motor (great slow control and stupid fast wheel speed)
Deans on motor and esc
Halo warthog body.
I will also include the extra stuff i have around here like some claws on axial beadlocks, links, and other misc.
Here is a list of everything i know to be "wrong".
On the wheels one screw is broken, you can thank chip cross for that
There are a couple more missing but they are standard 4/40 screws so you can get them at any hardware store.
The green heatsink likes to fall off the mamba max. It just needs some of that thermal glue that castle uses or a small tywrap i guess.
The tranny is missing one screw that connects the motor plate to the tranny.
I just noticed it tonight.
The body just sits on it right now. I never got around to making a mount for it.
Truck runs great on the ledge behind my apartment.
I figure i have over 300 in electronics (thats at used and not new prices)
An swx roller with cac beadlocks is worth $200 so you get all that plus a body, lipo, lipo charger etc all bundled together. Just add a spektrum tx and you are ready to go.
$500 shipped.
Axial Axles
SWX chassis
CAC aluminum beadlocs with rovers
TCS 4 link uppers on the front and rear
Mamba Max
Castle BEC
Futaba S9351 Steering Servo
Spektrum SR3000
CKRC 3S 1500mah Lipo
Venom blinky lipo charger. (cheap but works)
JP Custom RC 35T Warrior R motor (great slow control and stupid fast wheel speed)
Deans on motor and esc
Halo warthog body.
I will also include the extra stuff i have around here like some claws on axial beadlocks, links, and other misc.
Here is a list of everything i know to be "wrong".
On the wheels one screw is broken, you can thank chip cross for that
There are a couple more missing but they are standard 4/40 screws so you can get them at any hardware store.The green heatsink likes to fall off the mamba max. It just needs some of that thermal glue that castle uses or a small tywrap i guess.
The tranny is missing one screw that connects the motor plate to the tranny.
I just noticed it tonight.
The body just sits on it right now. I never got around to making a mount for it.
Truck runs great on the ledge behind my apartment.
I figure i have over 300 in electronics (thats at used and not new prices)
An swx roller with cac beadlocks is worth $200 so you get all that plus a body, lipo, lipo charger etc all bundled together. Just add a spektrum tx and you are ready to go.
$500 shipped.
