K KevinGalusha RCTalk Qualifier Messages 126 Reaction score 0 Location Hanford, Ca RC Driving Style Bashing Jan 10, 2009 #1 Would the 2.5 RPM arms work with a .15 pro truck??
K KevinGalusha RCTalk Qualifier Messages 126 Reaction score 0 Location Hanford, Ca RC Driving Style Bashing Jan 11, 2009 Thread starter #2 Gee! Not everyone at Once Now! haha :
B bleugt RC Newbie Messages 7 Reaction score 0 RC Driving Style Jan 12, 2009 #3 Yes they will. I have them on my .15. You will also need new turnbuckles and axle shafts to match the length. Hope this helps.
Yes they will. I have them on my .15. You will also need new turnbuckles and axle shafts to match the length. Hope this helps.
NCNitro Fist of Goodness In Memoriam Supporter Excellence Award Build Thread Contributor Messages 19,396 Reaction score 887 Location Central Florida RC Driving Style BashingRacing Jan 12, 2009 #4 As stated, yes, the arms will fit, but you will need to replace the turnbuckles for sure. The driveshafts should be ok unless you have cvds, then those will need to be replaced too.
As stated, yes, the arms will fit, but you will need to replace the turnbuckles for sure. The driveshafts should be ok unless you have cvds, then those will need to be replaced too.