ok well i think i am going to use a Losi 22s SCT because it is cheapish, great suspension, good basher, easily modified, VERY STRONG and there is a few other nice features about it as well like it is very beefed up around the parts that are going to be dealing with this power. stuff like that...
yeah i probably would do that if they didn’t come back to me but they did and they said it was a typo and they changed the max voltage of the Tp 3650 3080kv to 19 volts so 4s. So i think i will probably go with the 3650 3080kv because according to a speed calculator on the same gearing the 3650...
So since i also want to do some bashing with the rig. I don't really think i want the Tp 3630 7700kv any more because it will probably over heat really quickly so i want to choose from these options.
3630 4700kv on 3s
3640 4700kv on 3s
3650 3840kv on 3s [probably]
3650 3080kv on 4s...
Would tall gearing for that motor be like a 45t pinion and a 72t or 84t spur? because it is a very long motor 84mm long so i would have thought even on 4s and that gearing it would be alright?
thanks for the reply
I am also thinking of running a Tp 3650 3800kv in it with a mamba monster x 8s. Would that be a good combo for speed and bashing? Also (i am a bit confused by this) but would i be able to run the Tp 3650 on 4s because it says on Tp’s website that the maximum voltage for it...
so in other word you would recommend getting the 4700kv one over the 7000kv because i can bash with it, it will get less hot and i will get more speed with the 4700kv one?
yes if i was going to bash it i would change the gearing dramatically so it doesn’t over heat.
And on TP’s website they say the 3640 4700kv will pull a max amps of 215 but the 3630-cm 7000kv will only pull 147 amps and my battery pack can only give 250 amps continuously so that was holding me...
I Am not too sure what vehicle i am going to use yet. I am thinking of a short course truck that wont really be over 4Kg. I am also trying to hit around the 127mph with the Tp 3630-cm 7000kv 3s with the Mamba Monster 2 and a 45t pinion and a 84t spur. Do you think i could go any faster with the...
i know right it would make life so much easier!
Any way would you have a educated guess to how many amps the MM2 can handle.
also which one would be the better motor with the MM2 the Tp 3630-cm 7000kv 3s or the Tp 3640 4700kv. The Tp 3640 4700kv will draw 215 amps max and the Tp 3630-cm 7000kv...
Thanks for the info
The can size of the 3630-cm 3s isn’t actually 36mm by 30mm. It’s actually 36mm by 60mm. very confusing why tp did that i know 😂
also i too have more fun drifting, jumping and bashing but i do like a fast car.(great typhoon setup😀)
and also why do you try and chase speed...
So to sum up...
you would recommend the mamba monster 2 over the mamba x even though for some reason the mamba x is more expensive and can't handle as many amps and is a 1/10 esc. The mamba monster 2 should be able to handle Tp 3630-cm 7000kv 3s fine. And finally you wouldn't recommend the...
Thanks for that I really appreciate it!
Also is their any other slightly cheaper ones out there that you could recommend because I am trying to do a budget speed build and that would put a hole in the budget. :)
Like would this one be alright
TrackStar 1/8th Brushless Sensorless 120A...
Hi guys
I am going to purchase a Tp 3630-cm 7000kv 3s and I was going to run it on a max10 sct esc but then I realised that the max10 sct has a 3s 4000kv limit! Now I never thought of this limit before because most esc brands don't state it! So obviously 7000kv is way too much for it on 3s...