Skip to content
RCTalk Logo
  • Home
  • Forum
  • Classifieds
  • Contact Us
Facebook Twitter
RCTalk Logo

Gear Head RC

Vintage Style 1.9 Aluminum Beadlock Wheels

April 7, 2015 Gear Head RC
0 Comments

Gear Head RC has just released a vintage style 1.9 beadlock wheel as a tribute to the classic wheel design. The Gear Head RC 1.9 Slot Mat v2 beadlock is made from CC-machined aluminum in the USA.

Read More Vintage Style 1.9 Aluminum Beadlock WheelsContinue

Gear Head Trail Torch DC-1 LED Light Bar

February 20, 2014 Gear Head RC
1 Comment

Gear Head has a new LED light bar that features 9 white and 4 amber ultra-bright LEDs in a low profile CNC machined black Delrin housing. The Trail Torch DC-1 LED light bar has been designed to run on 4.5 or 6 volts and can easily connect to an available AUX/BAT port on your receiver…

Read More Gear Head Trail Torch DC-1 LED Light BarContinue

Five Star EZ-Loc Beadlock Wheels

October 14, 2013 Gear Head RC
5 Comments

Gear Head has released another great looking aluminum scale wheel with their new 2.2 Five Star EZ-Loc wheels! Made from CNC machined aluminum right here in the USA, the new 2.2 Five Star EZ-loc wheels add style and ruggedness to your 2.2 scale crawler or scaler truck.

Read More Five Star EZ-Loc Beadlock WheelsContinue

Gear Head 1.55 Krusher aluminum wheels

July 3, 2013 Gear Head RC
1 Comment

Gear Heads latest scale rc wheels, the 1.55 Krusher wheels, are sure to look great on just about any scale truck. Made in the USA from CNC machined aluminum are available in natural aluminum and black anodized aluminum with re-machined accents. The Gear Head 1.55 Krusher wheels come in a set of four and are…

Read More Gear Head 1.55 Krusher aluminum wheelsContinue

Gear Head RC Champ 190 1.9 Beadlock Wheels

April 23, 2013 Gear Head RC
6 Comments

Check out the latest aluminum beadlock wheels from Gear Head RC, the Champ 190! Made right here in the USA from CNC machined aluminum adds a custom and vintage look to your scale RC truck!

Read More Gear Head RC Champ 190 1.9 Beadlock WheelsContinue

Hammer Five and Sixer 1.9 wheels from Gear Head RC

April 8, 2013 Gear Head RC
0 Comments

Gear Head RC has just released two new sets 1.9″ beadlock wheels, the Hammer Five and Sixer both made from CNC-machined black delrin as well as made right here in the USA! Both wheels include (4) Delrin wheels, (4) aluminum hubs, (8) Delrin beadlock rings and M2 screws.

Read More Hammer Five and Sixer 1.9 wheels from Gear Head RCContinue

Gear Head RC 1.9 ENK EZ-Loc Wheels

September 25, 2012 Gear Head RC
0 Comments

Gear Head RC continues to expand its scale wheel catalog with their all new 1.9 ENK EZ-Loc beadlock aluminum wheels. Made from CNC machined 6061-T6 aluminum right here in the USA. Gear Head RC’s EZ-Loc beadlock design makes mounting even the most difficult tires a breeze and the EZ-Loc ring attaches to the wheel with…

Read More Gear Head RC 1.9 ENK EZ-Loc WheelsContinue

SCX10 Rear Shock Relocation Kit from Gear Head RC

June 1, 2012 Gear Head RC
1 Comment

Gear Head RC has created a great way to further add to the scale realism of your Axial SCX10 rear suspension with their SCX10 rear shock relocation kit. Made from 5052 aluminum and made in the USA the kit includes all required hardware and installation instructions as well.

Read More SCX10 Rear Shock Relocation Kit from Gear Head RCContinue

Aluminum grille for Tamiya King Hauler from Gear Head RC

May 1, 2012 Gear Head RC
2 Comments

If you’re looking to take your King Hauler to another level of realism, Gear Head RC has just what you need with their new “Shredder” a billet aluminum grille. The Shredder is made in the USA from CNC machined 6016-T6 aluminum and repalces the stock plastic grille.

Read More Aluminum grille for Tamiya King Hauler from Gear Head RCContinue

Gear Head RC 4-Link Truss for Axial

April 1, 2012March 30, 2012 Gear Head RC
5 Comments

The new Gear Head RC 4-link truss for the Axial AX-10 and SCX-10 axles are CNC-machined from 6061-T6 aluminum and anodized black which replaces the stock plastic 3-link truss found on the Axial trucks. The truss mounts using the stock upper axle M3 screws. For connecting the upper links, the kit includes an M3x30mm socket…

Read More Gear Head RC 4-Link Truss for AxialContinue

Search

Recent Articles

  • Arrma Kraton 8s BLX 1/5th scale truck
  • Tekno EB410.2 buggy kit
  • RPM Losi Tenacity Front & Rear Skid Plates
  • RPM Front & Rear A-arms for the Arrma 4s Outcast & Kraton
  • Axial SCX10 II UMG10 6×6

Top Tags

2.4Ghz Axial AX-10 Axial SCX-10 Battery Battery Charger Boat Brushless motor Buggy Bumper Drivetrain Electric Motors Electric RC Electronic Speed Controller Gas Powered Holiday HPI Baja HPI Savage HPI Wheely King Large Scale RC Lights LiPo LRP Monster Truck NiMH Nitro Engines Nitro RC Off road On road protection Racing Radio Gear RC Bodies RC Rock Crawling RC Tires RC Wheels Sale Scale RC Short Course Truck Suspension Tips Tools Traxxas Revo Traxxas Slash Traxxas Stampede Traxxas T-maxx

© 2021 RCTalk

  • Home
  • Forum
  • Classifieds
  • Contact Us
Search