Where to set needles on picco 28?

[p3-28revo]

Hey i have a picco 28 and was trying to tune it and have no idea were to start the needles at. The manual says 10.5-11.5 on the lsn, and flush with the collar on the hsn. But i heard that the factory setting on the p3-28 were way off. Anyone know weres a good spot to start both the needles at:constipat?

 

[HeartBreak]

Setting them flush always works for me. That tends to be right in the area needed, maybe a hair on the rich side.

 

[Scrogg]

Seal the carb, the piccos are know for leaking where the aluminum /composite meet at. It should be a lot easier to tune afterwards. Use the FACTORY SETTINGS afterwards.

 

[Brushlessboy]

Flush is true for most but the LSN on my picco .28 protrudes around 1.5-2mm
Thats the current tune, not running in. Thats the Picco P3 like you have in your revo.

 

[p3-28revo]

thanks i already sealed the engine