What transmitter should I use to control 7 servos?

[polaris23]

Well I'm new to this forum and have a few questions. So I'm putting a RC4WD snowplow on a trx6 and need some help with electronics. So I will be running two servos for the plow plus the winch to lift the plow. Then then traxxas trx6 need 4 channels just to run the truck itself. So I need help with a good brand of transmitter and receiver to run all 7 of servos needed.. Thanks

 

[tntpoof]

id go with a dual stick radio with tank settings...id look at the radiolink AT9S.. it might seem a bit overkill.but I have this rx for one of my tracked erevos..with a stingray paintball gun and torit setup with laser pin point on it.. and I have fun with it in fpv mode....
https://www.radiolink.com/at9spro

 

[AClegg]

id go with a dual stick radio with tank settings...id look at the radiolink AT9S.. it might seem a bit overkill.but I have this rx for one of my tracked erevos..with a stingray paintball gun and torit setup with laser pin point on it.. and I have fun with it in fpv mode....
https://www.radiolink.com/at9spro

AND WHY HAVE YOU NOT SHARED PHOTOS AND VIDEO OF THIS VEHICLE??? In the 90's, I was out in the desert and saw two guys out there with their RC projects. One guy had a tank and the other had a helicopter. Both of them had BB guns attached to them. they were out shooting at each other. Of course the helicopter was shooting the crap out of the tank, but it would only chip off the paint. They made these plexi boxes to stand in while playing so they wouldn't get hit by BBs. I have RC conventions, I have seen tanks with paintball canons on them.

Back in 1999, I built a Ram show truck that had paint ball guns come out of the fenders. That was a fun build.

 

[jacobyoungren]

id go with a dual stick radio with tank settings...id look at the radiolink AT9S.. it might seem a bit overkill.but I have this rx for one of my tracked erevos..with a stingray paintball gun and torit setup with laser pin point on it.. and I have fun with it in fpv mode....
https://www.radiolink.com/at9spro

is there a guide on how to program the at9s to do tank style steering on one stick