stumped

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

arrmacide

RC Newbie
Messages
1
Reaction score
0
Hi,does anyone have suggestion or know?I am running a hexfly esc from a Senton mega and when I was looking it up with sound unit I accidentally plugged throttle JST wrong .Put it back correctly and now esc flashes quick red.Manual says that means throttle trim needs zero out .I've done that to no avail.Did I scramble it,I don't have another 2 wire
to check that way. Please,thanx
 
in my experience that has typically killed something, usually the RX when the power source is plugged in wrong/backwards. sometimes i have seen people get lucky.
 
If the RX is still turning on then Id try and run a re-calibration on your ESC and see if that works
 
Back
Top