Steering on HPI MT2

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

bullhead

RC Newbie
Messages
3
Reaction score
0
Hi guys

I bought a HPI MT2 19 years ago, I used it a handful of times and then Packed it away.

I have now just got it up and running but the steering doesn’t want to work. All the rods look fine and when I turn the front wheels by hand they look fine. I was wondering if a new black box where the steering rod goes to would be what I need?

Many thanks

Chris
 
Does the throttle servo (that's what the black boxes are called) work?
 
Nake sure that dual rate (ST DR or similar) on your controller isn't set to zero.

If that's not it, plug the steering servo into the throttle servo port (i.e. into channel 2 on the receiver instead of 1).

If it still doesn't work, you need a new servo.

They can be had from 15ish bucks up to 100+
 
Nake sure that dual rate (ST DR or similar) on your controller isn't set to zero.

If that's not it, plug the steering servo into the throttle servo port (i.e. into channel 2 on the receiver instead of 1).

If it still doesn't work, you need a new servo.

They can be had from 15ish bucks up to 100+
Thank you for your help, I’ll try that tomorrow 👍🏼
 
Back
Top