SAVAGE 25 mods? (read)

[HunterOnFire]

I have a stock Savage 25..
Great condition...

Are there any mod's for performance i can doo? I have a huge cart picked out... But 1 performance part... A flywheel weight with air holes.. But is there any clutching or engine mods i can do? oh yes and i have a aftermarket intake air filter on the cart and a Tuned Pipe...


But any others? I want it to rip. Please?

 

[HPIguy]

I have a stock Savage 25..
Great condition...

Are there any mod's for performance i can doo? I have a huge cart picked out... But 1 performance part... A flywheel weight with air holes.. But is there any clutching or engine mods i can do? oh yes and i have a aftermarket intake air filter on the cart and a Tuned Pipe...


But any others? I want it to rip. Please?

That flywheel isn't going to help performance much. You'd be better off spending the cash on a vented CB (clutch bell), and decent shoe setup to alleviate the dreaded melting spur gear issue the S25's had.

 

[HunterOnFire]

Alright. Do you have a link where i can look at them or purchase any?

 

[sweetdiesel]

There is also a sticky at the top of this forum for basic Savage upgrades.

 

[HPIguy]

Alright. Do you have a link where i can look at them or purchase any?

Yes, this was my setup for a long time, never melted another spur

I stayed with the stock size 14T bell, but used an OFNA vented bell from here:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKLM0&P=7

You'll need some shims to ensure your gear mesh stays consistent

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJKN3&P=7

Mugen carbon shoes

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNJ80&P=7

And their 1.0 springs

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNJ81&P=7

 

[Racer 1966]

If you really want it to rip, up grade to nice .28 engine. I've ran the crap out of my 25 but the stock engine isn't an overwhelming powerhouse.