Nitro Rustler with 2 speed transmission

[Jaydiaz1993]

Well, today I clocked just over 60 mph (97km.h) on a rich tune.
Was just about to lean it to finally make it over 100 km/h when my fiddlesticking throttle traxxas 2075 servo died.
What POS, this is a second one that died on me (different occasion), can't believe how poopy these servos really are!

That's fiddlesticking awesome though, you're finally getting the speed your looking for.
And I'm not surprised about the servos, don't get me wrong they're great while they last but they break easily.

 

[Jaydiaz1993]

https://www.rctalk.com/forum/threads/frankenstein-rustler-2-speed-tranny.136483/#post-1357735

 

[gandalfnz]

Bit angry at myself for not doing the homework first...
Just purchased Traxxas 6842 50T Spur, which is slash/stampede part, and its a perfect fit for a Jato.
Fitted it in 5 mins no need to raise the engine...etc, and still room left for even smaller spur, and local hobby store had it for 10 NZD.

Now I need to find out whether there are even smaller tooth count Traxxas spurs that will fit the Jato.
Still waiting on the ones from US to arrive.

Well, just received the spur gears from the States.
Unfortunately they are not a match.
The Jato clutch assembly 3 holes do not line up, the bearing hole is also too small.
Serves me right for getting too exited and not doing more research.

 

[Jaydiaz1993]

Well, just received the spur gears from the States.
Unfortunately they are not a match.
The Jato clutch assembly 3 holes do not line up, the bearing hole is also too small.
Serves me right for getting too exited and not doing more research.

Drill the holes to be a bit bigger, it does fit. I literally have it on mine. It does work like I said in the beginning you have to fiddle with it a bit.
when i get home I will take a picture... its literally the spur gear i have on right now.

 

[Jaydiaz1993]

Well, just received the spur gears from the States.
Unfortunately they are not a match.
The Jato clutch assembly 3 holes do not line up, the bearing hole is also too small.
Serves me right for getting too exited and not doing more research.

Were you able to adjust it?

 

[gandalfnz]

Were you able to adjust it?

Hey dude

Haven't tried yet, I am busy with my Savage 5.9, trying to get it to shift into the 3rd gear.
I will just have to Macgyver this eventually.

Thanks

 

[Jaydiaz1993]

Hey dude

Haven't tried yet, I am busy with my Savage 5.9, trying to get it to shift into the 3rd gear.
I will just have to Macgyver this eventually.

Thanks

Keep me updated what's wrong with the gears? Timing or it's just not shifting?

 

[gandalfnz]

Keep me updated what's wrong with the gears? Timing or it's just not shifting?

See my savage thread for more details....confused as....

 

[Jaydiaz1993]

See my savage thread for more details....confused as....

Will do

 

[Jaydiaz1993]

Hey dude

Haven't tried yet, I am busy with my Savage 5.9, trying to get it to shift into the 3rd gear.
I will just have to Macgyver this eventually.

Thanks

Jato tranny does fit 32pitch 46teeth spur gears with a little fiddling... I just have to raise the engine now to see how fast this thing can really go !

 

[gandalfnz]

View attachment 159368
Jato tranny does fit 32pitch 46teeth spur gears with a little fiddling... I just have to raise the engine now to see how fast this thing can really go !

Hey man

I am waiting for a slipper clutch assembly to pop up at Jennys RC, so I can easily swap between the spurs, rather than taking apart every time.
Then I will do my own Jato speed tests...

looking good.

 

[WickedFog]

Hey man

I am waiting for a slipper clutch assembly to pop up at Jennys RC, so I can easily swap between the spurs, rather than taking apart every time.
Then I will do my own Jato speed tests...

looking good.

If you want something on Jenny's, put an email notification on it, and it will usually be in stock within a day or three. Just be ready to order it quickly, because some items get bought immediately. Plus they list stuff on ebay as well, so it gets a lot of people seeing it.

 

[gandalfnz]

If you want something on Jenny's, put an email notification on it, and it will usually be in stock within a day or three. Just be ready to order it quickly, because some items get bought immediately. Plus they list stuff on ebay as well, so it gets a lot of people seeing it.

Yep, I always select an email notification....

Thanks!

 

[Jaydiaz1993]

Update on the car

 

[Jaydiaz1993]

 

[V E R S A]

Thank you for the welcoming @Tunedpipe here's some pics, anything helps! it does sound like a fun project I'm just in search of more speed I can't seem to pass 58 mph and aside from spur gears and clutch bell, transmission is the only thing that I can of that would make it faster...
Pics: View attachment 152387View attachment 152388View attachment 152389View attachment 152390

Thank you for the welcoming excited to join! Hopefully it leads me in the right direction Jato tranny on a slash would be pretty awesome if you dig anything up please share, Thank you!

Please help I’m currently trying to do this I seen your build on YouTube bet I need more details I can already see that I need a 24t clutch bell and also did you have to cut a new slot for the flywheel PLZZ HELP picture message anything

 

[Jaydiaz1993]

View attachment 248555Please help I’m currently trying to do this I seen your build on YouTube bet I need more details I can already see that I need a 24t clutch bell and also did you have to cut a new slot for the flywheel PLZZ HELP picture message anything

The slash might be a little different but send me a pic of what yours looks like I'll show you what I did to mine.

 

[V E R S A]

The slash might be a little different but send me a pic of what yours looks like I'll show you what I did to mine.

I have a rustler to not slash

 

[V E R S A]

The slash might be a little different but send me a pic of what yours looks like I'll show you what I did to mine.

I have to take more pictures this all I got

 

[V E R S A]

The slash might be a little different but send me a pic of what yours looks like I'll show you what I did to mine.

My main concern is how dose the engine mount with the 2speed trans