Motorsaver Filter

[alx]

Will the savage air filter from Motorsaver fit on the revo3.3 without getting in the way of the spur?

http://www3.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=SAV90&search=Go

that one

 

[TWOCANE]

Mine is a bit different, but it fits with a little room to spare.I also have a 72 tooth RRP spur.

 

[itsalifeworthliving]

uhmm. my savage filter will barelly fit, it doesn't rub on the spur thou,the filter itself kinda points too far down, the center trans is in the way.. dont bother with it.. if your lookin for a better filter than stock, dont wory bout the throat and use the revo one w/ any daul stage filter you get

Mine is a bit different, but it fits with a little room to spare.I also have a 72 tooth RRP spur.

WHAT!! ON THE REVO.. 72 TOOTH!! YOU SURE? Are you runnin a diffrent pitch?

 

[Cupooterluvr]

They make one specifically for the Revo.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHWU0&P=ML

 

[TWOCANE]

I have a t maxx not a Revo.

 

[Cupooterluvr]

I know, I was replying to alx. :\

 

[alx]

Yea i know they have one for the Revo, I was asking because I tore a hole in my stock neck and my LHS only has the Savage one. Thanks guys

 

[Cupooterluvr]

I don't know.... It might fit, but on my neighbor's Revo the carb opening is REALLY close to the spur. He's got a hole in the bottom of the filter neck from where the spur rubs it. That's why I was thinking there was no way that Savvy filter would fit.

 

[brmax]

buy the savage one

The savage air filter comes with the outer pre filter and the revo one doesn't. You can use the stock air filter tube by cutting off the large cone. i can put up pics of mine if u need to see wat i did.