Let’s see your drag setups

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
It’s just a dr10 body with hellcat stickers on it. I’ve since retired both bodies and now using a Corvette body on each instead. The green one goes to the Losi. The Copper one is for the dr10 .
I was gonna say it sorta looks like a hellcat but not really lol

I love Corvettes. What type of green did you use on that one? It really pops!
 
The promod Vette body from proline is pretty much the perfect drag body if you're
 
I was gonna say it sorta looks like a hellcat but not really lol

I love Corvettes. What type of green did you use on that one? It really pops!
I used fluorescent yellow center stripe faded into candy apple green faded into Emerald green along the bottom. Backed with gunmetal then white. No two bodies are the exact same. Love the fade look.
 
I'm running these two currently - Both are nitro. Invader runs an OS .21, MeatETR runs an OS .12

20210926_221128.jpg

241430932_10221673125160877_2130209519682988417_n.jpg

244177007_10221775605842830_834994838315064237_n.jpg
 
Just finished this one up. Waiting on the weather to run her.
 

Attachments

  • 1D7C917B-C200-4EED-BFD4-77AA51AAA4C9.jpeg
    1D7C917B-C200-4EED-BFD4-77AA51AAA4C9.jpeg
    276 KB · Views: 53
  • 6E65D640-E5A4-442B-ADB8-D1A8515E895A.jpeg
    6E65D640-E5A4-442B-ADB8-D1A8515E895A.jpeg
    287.8 KB · Views: 53
  • ECEB2561-1919-4507-992C-8C7C53579DA5.jpeg
    ECEB2561-1919-4507-992C-8C7C53579DA5.jpeg
    259 KB · Views: 52
Just finished this one up. Waiting on the weather to run her.
Very cool! Here is ours so far. Ordering a Tekin motor and ESC for it in a couple weeks. Then just waiting on snow to clear.
20211225_062207.jpg
 
Very cool! Here is ours so far. Ordering a Tekin motor and ESC for it in a couple weeks. Then just waiting on snow to clear.
Nice! Hopefully the weather breaks early this year. Getting sick of building RC’s. Ready for some speed.
 
I have another one in the works, basically made out of spare parts from Invader. (I actually only need to buy driveshafts and rear wheels/tires). I'm just waiting on my new CF cutter bits, and then I'll cut the chassis and start putting it together. It'll use the OS .21 tm from Invader after I switch Invader to a drag modded LRP .32 big block. Seeing these '67 Stangs got me thinking it'll use that body, and I'll call it "Hissed Off", lol. Even whipped up a little logo:

hissedoff.jpg
 

Attachments

  • 5F52BC80-1946-45E0-9EE1-F1F5BBFD308F.jpeg
    5F52BC80-1946-45E0-9EE1-F1F5BBFD308F.jpeg
    259.5 KB · Views: 46
  • 7E6301C8-5DDD-4A12-BE0E-A796A31761E5.jpeg
    7E6301C8-5DDD-4A12-BE0E-A796A31761E5.jpeg
    313.7 KB · Views: 47
  • 1CF3A75C-1F71-4D84-830B-A945EE6F1FDF.jpeg
    1CF3A75C-1F71-4D84-830B-A945EE6F1FDF.jpeg
    277.2 KB · Views: 42
  • C42648D0-C3DB-4E60-8A13-7CBE73F1B611.jpeg
    C42648D0-C3DB-4E60-8A13-7CBE73F1B611.jpeg
    278.7 KB · Views: 45
Future motor head
 

Attachments

  • A5E0391E-0864-472C-9A80-8C5834FB9691.jpeg
    A5E0391E-0864-472C-9A80-8C5834FB9691.jpeg
    647.7 KB · Views: 52
these drag cars are the most sexy things in RC

Badass.

I have too many ongoing projekts.

But:
Some day you will see a Black NOVA from me here.
I have been dreaming of one 3years now
 
I still have not run my Mustang drag car. I have other projects going on. But I did find a place to run it. That’s half the battle. But it’s so cool to have just sitting on my bench I am in no real hurry to run it.
 

Similar threads

acrx7
Replies
1
Views
759
J’sCrawler
J’sCrawler
thatcraig
Replies
47
Views
2K
easy rider
E
S
Replies
10
Views
1K
bill_delong
bill_delong
Back
Top