Just figured out what was causing the steering problems with rustler

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

DavidB1126

RCNT Champion
Build Thread Contributor
Messages
196
Reaction score
226
Location
Baltimore
RC Driving Style
  1. Bashing
So tonight I went and took a look at the rustler. Because of school I haven't been doing a lot of RC's last couple of weeks. So the right side caster block was bent and the pin with the E clips has been bent. So going to post on my hobby shops facebook group to see if they have any aluminum parts, if not I will get them off of amazon. The other side steering and caster blocks were fine the pin was a little bent. It was good that I got the screw pins so I don't have to deal with the e clips. So next with the rustler is aluminum steering and caster blocks, RPM Arms and Front bulkhead, RPM Front bumper. Next for the slash is Aluminum bell crank and lcg conversion kit.

Next parts:
Steering Blocks
Caster blocks
bearings
bellcrank
Front Arms
bumper
rear arms
bulkhead
slash lcg

And also my dad got me some summit racing stickers from his co worker so I put some new stickers on the bodies.
242896964_1235486063600654_2147037453711905252_n.jpg
242968510_346810803795238_348080659525174467_n.jpg
242836904_674038790237085_6153895406569887708_n.jpg
242997093_294149675442622_1701128583517575298_n.jpg
242937096_151297907159408_7591564854530687888_n.jpg
242686025_846748795982124_4903134277042335333_n.jpg
242671365_991573041402744_2093270624376102552_n.jpg
 

Similar threads

Top