JRL 1995 Viper RC toy steering question

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

yoyohead55

RC Newbie
Messages
1
Reaction score
0
Hello! Long story short, my father took apart my childhood Viper toy and now I have four wires that somehow control the steering but I dont know what goes where, and there are no labels or codes on the parts. Any idea how to wire this steering as seen in the photos!? Thanks!
 

Attachments

  • IMG_6468.jpeg
    IMG_6468.jpeg
    331.6 KB · Views: 73
  • IMG_6469.jpeg
    IMG_6469.jpeg
    255.2 KB · Views: 69
  • IMG_6470.jpeg
    IMG_6470.jpeg
    293.9 KB · Views: 70
put a meter on the green wire and check for continuity to ground, then change meter to12 volt and hook up to red and yellow. turn steering to see if you have power. if so they will go on the solder con on servo
 
Back
Top