Jerky steering?

[massivex]

My steering turns to the right quickly and smoothly however, turning left is a little slower and jerks alot. Kinda turns in increments and not as one swift movement. Is this my servo or a steering linkage problem?

Thanks

 

[nitro dave]

It could be a bushing that is binding or sticking in the steering bell crank. The T Maxx's don't have bearings in their steering bell cranks, but that is something you would do well to upgrade to, or better yet the proline steering kit. You will never regret the $40.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDCW6&P=7

 

[FLATTOP]

Originally posted by massivex
Is this my servo or a steering linkage problem?

Thanks

Could be either one, you could have something binding in your linkage, I would check that first before pulling your servo out.
Another thing you could try if you have a spare servo laying around is to unplug your present one from the reciever and plug in the spare servo and see if it still does it.