I totaled a new plane Sunday, and I'd like to replace it without making a dent in the savings account. So some other toys must go. All prices include shipping / insurance and PP fees anywhere in the lower 48. No trades, need cash, Paypal only unless you're local.
Axial SCX10 Rubicon kit, I built this and hardly ever run it, or any of my other scalers for that matter. Has maybe 6 runs on it. Driver figure is not included BTW.
The chassis setup is built stock, other than flipping the trans and moving the battery up front.
Holmes Hobbies 35T motor
Axial AE2 ESC with Castle Creations standalone BEC (allows you to run 3S and provides plenty of power for the lights and such)
Savox SC-0251 steering servo
Hoosier daddy light kit and HeyOK performance light controller
Axial 8 hole beadlocks with lattice works shift hubs
Proline G8 TSL swampers, and my home made front rock rings.
The only issues areI messed up drilling for the body mounts in the rear of the body, and had to do them as shown in the pics. Also the paint I used on the hard top (that I never use) is flaking. Other than that, she's good go. My build thread is here;
https://www.rcnitrotalk.com/forum/threads/axial-jk-rubicon-build.107601/
**********************************************SOLD**********************************************
Next up is my brushless E Revo. Truck is geared for running 4s, although it will handle 6s I just don't feel the need personally. Tires and wheels have 2 runs on them offroad only. I did cut a small hole in the body to mount my GoPro. ESC was converted to run a single battery so my nephew could drive it, but I'll include a series adapter for running dual packs though. I went through the whole truck when I bought it, that thread is here;
https://www.rcnitrotalk.com/forum/threads/new-e-revo.111015/
Proline Badlands mounted on 1/2 offset Proline Desperados
MIP CVD drives on all four corners
Blue anodized GTR shocks
Traxxas VDP shock piston kit
RPM bumpers
TRX rear chassis brace
Will also include stock shocks
NIP sway bar kit
rear spool
new front CV boots (need replaced)
spare spur gear
and TRX wheelie bar wheels (look in my thread, you'll see what I was going to do with them)
Will come RTR with Traxxas link radio system, just add your batteries and go.
****************SOLD*****************
Thanks for looking
Axial SCX10 Rubicon kit, I built this and hardly ever run it, or any of my other scalers for that matter. Has maybe 6 runs on it. Driver figure is not included BTW.
The chassis setup is built stock, other than flipping the trans and moving the battery up front.
Holmes Hobbies 35T motor
Axial AE2 ESC with Castle Creations standalone BEC (allows you to run 3S and provides plenty of power for the lights and such)
Savox SC-0251 steering servo
Hoosier daddy light kit and HeyOK performance light controller
Axial 8 hole beadlocks with lattice works shift hubs
Proline G8 TSL swampers, and my home made front rock rings.
The only issues areI messed up drilling for the body mounts in the rear of the body, and had to do them as shown in the pics. Also the paint I used on the hard top (that I never use) is flaking. Other than that, she's good go. My build thread is here;
https://www.rcnitrotalk.com/forum/threads/axial-jk-rubicon-build.107601/
**********************************************SOLD**********************************************
Next up is my brushless E Revo. Truck is geared for running 4s, although it will handle 6s I just don't feel the need personally. Tires and wheels have 2 runs on them offroad only. I did cut a small hole in the body to mount my GoPro. ESC was converted to run a single battery so my nephew could drive it, but I'll include a series adapter for running dual packs though. I went through the whole truck when I bought it, that thread is here;
https://www.rcnitrotalk.com/forum/threads/new-e-revo.111015/
Proline Badlands mounted on 1/2 offset Proline Desperados
MIP CVD drives on all four corners
Blue anodized GTR shocks
Traxxas VDP shock piston kit
RPM bumpers
TRX rear chassis brace
Will also include stock shocks
NIP sway bar kit
rear spool
new front CV boots (need replaced)
spare spur gear
and TRX wheelie bar wheels (look in my thread, you'll see what I was going to do with them)
Will come RTR with Traxxas link radio system, just add your batteries and go.
****************SOLD*****************
Thanks for looking
Last edited: