Holy copddels

[PiErow]

I painted three lids with pactra normal. This was my fisrt time ever painting something(I'm 13), from normal spray paint, a house, walls, anything. The paint sucked. The piant jobs looked like crap and i got all bumed out. Well i decided to try again with fascolor, and wow. What a difference, it went on so easy. I'm only on the 1st voat of my first color. So I'm letting it dry before i paint the secound coat. Pics to come!!!!

 

[Candyman]

OK, what the hell is "copddels"?
There are a few tricks when spraying with cans. Yes, the paint can make a difference. Also, make sure you shake it well. Get it good and mixed. Then run the can under some warm water for a minute. That will warm the propellant in the can which increases it's pressure and will let it spray more consistently and with a finer mist.
And if you're using Faskolor, you can blow the paint dry with a hairdryer so you don't have to wait as long between coats.

And as usual, you're obligated to post pictures when you're done.

 

[AC48]

Wierd, I have had great luck with pactra. The color goes on very smooth and even for me. At least you're having good luck now, lets see some pics.

 

[PiErow]

I'm using an airbrush, aztec metal. I ruined the paint job. I went to take off the mask to paint the flames and all the paint peeld away...

 

[svenz]

If you do decide to use that paint again, before lifting the mask lightly trace the edge of the mask with an xacto knife. that should keep the paint from lifting

 

[Diver6127]

I'm only on the 1st voat of my first color. So I'm letting it dry before i paint the secound coat. Pics to come!!!!

What's a "voat?" :jk: Don't get impatient and start drying it with a hair dryer. The surface will be dry but underneath it'll still be mush and a slight rub will ruin it. After you're done, let it cure for a couple of days to make sure it's completely dry before running it.