Help with hglrc zeus 5 aio and dsmx srxl2.

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

MalibuMiller

RC Newbie
Messages
1
Reaction score
0
I am trying to get into the quadcopter hobby and have a dsmx srxl2 micro receiver. I am attempting to connect it to and set up the receiver with a hglrc zeus 5 aio flight controller following the wiring guide found here https://www.thingiverse.com/thing:4769576. Unfortunately, it does not include how to solder this type of receiver. I am unable to get my receiver inputs to do anything. The receiver powers up and binds to the transmitter, but I'm unsure if I have the signal wire attached correctly or configured in beta flight correctly. I currently have the signal wire (S) attached to the pad labeled RC and the No Connect (NC) not soldered to anything. Motors spin when using the motor test in betaflight so I figure the receiver is the issue. This is my first time using a flight controller of any kind of help would be appreciated.
 

Similar threads

Back
Top