Help please! Stock setting for a hyper 7 .21 lsn and hsn

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

xl3nt

RC Newbie
Messages
14
Reaction score
0
RC Driving Style
  1. Bashing
  2. Racing
hello i need some help, i need the stock settings for my hyper 7 tq .21 LSN and HSN I've tried to find it in the online manual but it doesn't say anything about it. i need it beacause my engine will not run and i feel its beacause its too rich or maybe too lean when i start it i have to open the throttle quite a bit and the it starts revs out and then cuts out if u can help i would really appreciate it thanks
 
My Picco .21 is almost the same engine, it has the same carb for sure.
From my manual...
HSN 6 turns out from closed.
LSN 6.5 to 7.5 turns out from closed.
 
when you say turns to you mean full turns or half turns when i say full turn i mean that one side of ur screw driver will go all the way round is that what you mean?
 
A full 360 degree turn.
 
My Picco .21 is almost the same engine, it has the same carb for sure.
From my manual...
HSN 6 turns out from closed.
LSN 6.5 to 7.5 turns out from closed.

Holy crap. Picco must have some pretty fine needle settings to have factory that far out. Must be much more forgiving or adjustable for finding that sweet spot. The majority of factory settings I've seen hover around 3-4 turns out. Does Picco run extra thick or long needles or something?
 

Similar threads

Back
Top