help... My tmaxx 3.3 won't turn...

[T-MAXX_BOOSTIN]

So today I go to run my truck n the steering sounds like it wants to turn but it seems like something is stoping it any advice I need help bad...

 

[ajames942]

Look under the front at the steering "linkage" i guess and see if anything is caught up in it, if not, Disconnect your steering servo saver, and see it if turns.

 

[T-MAXX_BOOSTIN]

Alright I got nothin stuck in there... I'm somewhat new to nitro whats the process I need to to take at this project?

 

[ajames942]

On top of your servo, there will be the servo saver,take that off via hex driver, and turn on your electronics, and see if the little wheel type thing turns fully. Also, when you disconnect that, see if your wheels turn freely. If your servo does not move, then it is your servo that is bad, if your wheels do not turn freely, then theres a problem with your steering.

 

[dan the man]

hi, if you take the steering servo out and take the casing of there will be cogs they might of come out of the sockets put them back to geter and se if it works then, but dont put the casing back on just se if they work first

 

[hooptie15]

have you tightened the steering linkage at all.....if so it might be toooo tight ....