Futaba T3PV question.

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

IvanSusanin

RCTalk Member
Messages
31
Reaction score
6
Have a Futaba T3PV transmitter. Just purchased Futaba r2104gf receiver. Tried linking it, had to switch sys to hf. Green light on receiver, transmitter keeps blinking blue led and beeping. What am i doing wrong?
Any help would be appreciated.
 
@IvanSusanin to link both your transmitter and receiver you'll need to follow the following steps:
  1. Bring the transmitter and the receiver close to each other, within 20 inches (half meter).

  2. Turn on the transmitter and the receiver.

  3. Push and hold the Link Switch of the receiver.

  4. When the link is complete, the LED in the receiver changes to solid green.

Your Sys type, I believe, should be set to SFH.
 
@IvanSusanin to link both your transmitter and receiver you'll need to follow the following steps:
  1. Bring the transmitter and the receiver close to each other, within 20 inches (half meter).

  2. Turn on the transmitter and the receiver.

  3. Push and hold the Link Switch of the receiver.

  4. When the link is complete, the LED in the receiver changes to solid green.

Your Sys type, I believe, should be set to SFH.
Hi. Thanks for the reply. I have changed that. Managed to figure it out. Thanks
 
Back
Top