• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

custum HF0612 OWB Press "impressive" for free

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
N

NITROMITE

Gone - bye bye.
Messages
151
Reaction score
0
Points
0
Location
pataskala, ohio
RC Driving Style
  1. Bashing
picture.php
:first_place::first_place:
 
Lessen said:
An explanation or something would be helpful. I'm not 100% sure on what you've got there.
Click to expand...
this is a home made press to remove the one way bearing from the hex hed so you can swap bearings alot cheaper than buying a new one i found the bearings for $1.70 vs the hobie shops $20.00 bearing notice the bearing is out of the hex head

Racer 1966 said:
Yeah, the first time I saw this post the pic wasn't even there.
Click to expand...
thanks 4 the help on this one 1966 yours is alot nicer but this works just as well
 
Racer you still amaze me with some of the stuff you think up. I would have never thought to ter to press out one of those. Actually never knew it was possiable. I learn something new here every day almost. Sometimes it is even useful! Thanks Racer and Guy, I am going to have to try this too.
 
Racer 1966 said:
No problem! So where did you get the clamp? Is it for a special purpose? I haven't ever seen one quite like it.
Click to expand...

it was a clamp i had laying around the garage i knew i would find a use 4 it some day but what it wen:)t 2 i havent a clue.

frickenjoey said:
Racer you still amaze me with some of the stuff you think up. I would have never thought to ter to press out one of those. Actually never knew it was possiable. I learn something new here every day almost. Sometimes it is even useful! Thanks Racer and Guy, I am going to have to try this too.
Click to expand...

hey thats what we are here 4 all of u help me out and share your ideas. i use a socket just big enough for the bearing to fit in but not the hexhead:hehe: to remove it
 
Guy Ankrom said:
this is a home made press to remove the one way bearing from the hex hed so you can swap bearings alot cheaper than buying a new one i found the bearings for $1.70 vs the hobie shops $20.00 bearing notice the bearing is out of the hex head
Click to expand...


Ahhh... that's awesome! :thumbup::thumbup:
 

RC Builds

Back
Top