car starts but stops when i press the acceleration plz help

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

HSPbackwash

RCTalk Basher
Messages
60
Reaction score
0
Location
australia
RC Driving Style
  1. Racing
my nitro buggy starts but when i press the acceleration the engine just stops running but yesterday it worked fine plz help
 
check needle settings could be a little rich and check fuel lines for pin holes
 
Once it starts, let it warm up before running it. You probably have to lean the LSN, but don't do it till it's at running temp.
 
kk thanks for the help

by the way my HSN is set on 2 and a half turns.
 
Every Once And A While I Would Have The Same Problem You Do(HSPbackwash). Although I Finally Got It To Crank By Messing With My Carb. I Highly Agree With "Josh1993"
 
also make sure your throttle settings arent on reverse :)
 

Similar threads

T
Replies
10
Views
1K
nino
K
Replies
3
Views
396
tudordewolf
tudordewolf
J
Replies
1
Views
521
alfredwong2003
A
E
Replies
6
Views
604
easy rider
E
Back
Top