Axial .28 spec1 Exhaust Options ????

[bbspurgeon]

I just recently bought a Axial .28 spec1 engine and haven't got an exhaust system yet. I was wondering what the best one for the dollar would be and whats the best out there? I don't want to spend alot but I don't want any crap either. If you could give me some links to some. I have found a couple on ebay like Losi RE11, Jammin JP2, TSAIS, Ofna, THS. Let me know which would be better.

 

[Scrogg]

What truck? JP-3 gives it good low to mid, not much top end. The engine has plenty of bottom end as is though.
The THS pipes are nice and work well. That's all the pipes i have tried, besides the HPI polished pipe.
I just tried out an Ofna 086 on my 3 port Picco .21, this is the strongest pipe i have ever used. The difference between it and a JP-3 was unreal. The 086 is a top end pipe, but the entire rpm range was brutal with 1.1mm clutch springs and aluminum shoes in my Jammin truggy.

 

[Captain Chaos]

Interesting I am running the JP-3 with my Go 3PT on my Jammin.I have nothing to compare it to because its the only pipe I have

 

[bbspurgeon]

This is going into a T-maxx. I have gotten the RC Solutions cyber maxx kit which allows you to put a big block engine on it. The only thing I have found is that the fuel line nipple on the exhaust are in the wrong place when the exhaust points down. They are made for the other side of the vehicle???? I know I can put it down and then just route my fuel line different but???? Any ideas?

Would this work : http://cgi.ebay.com/OFNA-10059-1-10-Rear-Exhaust-Manifold-One-Piece-NEW_W0QQitemZ120275141569QQihZ002QQcategoryZ34061QQssPageNameZWD1VQQrdZ1QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247
for the header and this for the pipe : http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=220336419358 Thanks for the help Ben

 

[Scrogg]

I don't know enough about T-Maxx trucks to help you. Somebody else?