Ax10 mip cvd tip

[abadk9420]

I have been running MIP CVD's for about 7 months now, in the beginning had a few issues with pins breaking or bending, but for the last 4 months my MIP's have been working great ever since I started using TriFlow teflon lubricant on them, I just saturate the pivot area and wipe off the extra so there is just a lite coating, I have not had any issues or failures in the past 4 months, I have spun a hex and broke a iron cross heavy duty locker , but my MIP's are holding up fine, I am running on a 3s lipo with a 45t motor

http://www.triflowlubricants.com/products/superiorlubricantdrip.html

 

[h8z2luze]

Good post! Sounds like its pretty good stuff.

 

[NCNitro]

Is it only available on line or can you get it locally too?

 

[abadk9420]

Is it only available on line or can you get it locally too?

Most bike shops will carry it, and possibly hardware or auto parts stores, the bike shop I go to uses it on chains, shifters, derailers, and cables, the stuff works awesome IMO!!! I just posted the link to it on line as more of visual aid so people would know what they were looking for..

 

[NCNitro]

Cool, I'll have to check out the bike shop near me. Thanks for the tip.

 

[abadk9420]

Cool, I'll have to check out the bike shop near me. Thanks for the tip.

No problem I am sure it would help out any CVD's, and the stuff smells pretty good to.