3.3 engine idle really high...

[flyinhigh]

What sup guys, got a new 3.3 engine and when breaking it in i had zero trouble. It started up right away and i ran 6 tanks through it. At the end of my sixth tank it started to idle really high and would not come to a complete stop. Almost like I was still giving the truck gas. Its running on stock factory tune settings...is this a simple fix? Any help will be appreciated, Thanks!

 

[nikko508]

Check for any air leaks, make sure the carb is tight in the eng, and check your servo for sticking I would start with that for now.

 

[tmaxxman58]

or the throttle control on the controller.

 

[nikko508]

Yes always make sure the knobs are are in the proper location give them a tweek to make sure