Here's the deal, i have a TRX 3.3 engine on its way to me in the "snail" mail and i need to know one itty bitty piece of info.
just how long is it safe to run these TRX 3.3 engines at max RPM under load (I.E, propelling the revo) ??
i did try asking Traxxas themselves, but all i got...
You guys ever play around with different size head gaskets. I bought a couple of packs to replace mine and they come with three sizes..
Just wondering if it would make much of a difference.. They have one smaller and one larger than stock...
Hey guys, I'm tearing down both of my 3.3 mills to clean and reseal.. I got the first on ready to go. It just has to set up.. Then I will tighten everything down, I learned from my last job..
Question is on the newest mill. It has about 1 1/2 gallons on it and is in pretty good shape but...
But more likely.......stupid Beddo.
Firstly, sorry for the long post, but I feel I need to explain everything I've tried.
OK, so I've got a TRX 3.3 which I have run about 3/4 gallon through of 25% (1st Monster Juice but now Byrons). The motor used to start no problem, warm or cold, and...
i have a air leak on my 3.3 engine behind the flywheel coming out of the bearing and i have replaced it once and it still leaks any ideas on what to do or what it could be doing this for thanks
I'm looking for the cheapest place to buy a piston and sleeve for the trx 3.3. I'm in uk so a uk seller would be better but its looking like its cheaper from america. cheapest I've found is $44 and $10 shipping
When you take the carburetor off and look inside where the carb sits, almost were the crank port is, is there supposed to be a tiny hole going towards the front bearings? Looks like it was machined, but seems kinda weird. Don't remember seeing this on other motors. Possibly a inner bearing lube...
I have a brand new TRX 3.3 out of a platinum revo (bump start engine) this is the most powerful engine traxxas makes! Resonator pipe for engine also available. $120 for engine and $20 for the pipe. I will post pics tonight.
what motor is better to run and why, I have a new 3.3 tmaxx with all bolt ons and i was given a os 18 motor and was told it was way better to run and that it would be faster than my 3.3.
thanks for the advice
what the bearing codes for the trx 3.3 front and rear bearings. i know that the front bearing is 697rs (please correct me if I'm wrong). we have a local SKF and NSK bearing around the area and hoping that it would be cheaper to get it directly from the bearing center rather than ordering it...
So come spring time, I'll be putting the Micro T away and bringing out the big boy! I'm going to be putting in a new mill and can't decide whether to shell out the extra cash for the .26 Max Red Dot or save some cash for other mods and go with the 3.3. I know both have good power, but from the...
Ok Folks up for sale today we have a gently used ,properly broke in TRX 3.3 with all of the gear. The Engine has 5 or so tanks on it passed break in.
It came out of my Slayer, which I am converting to electric. Only trades welcomed would be to that end.
Comes with what you see here, I can...
hey fellas, i just looked at a motor that came with my t-maxx 4909 (used) and theres seems to be a lot of damage in there . when i got it i did'nt fart arond with it, i installed a picco .26 .
damge to the 3.3:
shoulder on piston brocken off...
Everything was going great during the breaking in of the engine, I was on the 5th tank of gas, reving to full throttle for the 3 second plus 2 second count, it was shifting into the next gear several times and then suddenly piston got suck at tdc. I opened the engine and found that the bottom...
my t-maxx with a 3.3 engine in it will not start. I had it out running and after about a half of a tank it shut off and now it wont start. Heres what i did, remove all fuel lines, replaced with new line, cleaned fuel filter,new glow plug. when i try starting it without giving it throttle it just...
ok iam having a problem getting my t-maxx to idle runs great just off idle but after doing a run when letting off the throttle the motor wants to idle way up and stumble like detonation before it comes down and then it wants to stall i have went in and out with the lsn and it running between...
I was just doing my 6th tank on a new TRX 3.3 and the one way bearing failed / siezed on the crank killing the engine .... I was stone cold sober at the time so it took me a tear down to figure it out. Anyway, while I was trying to start the engine with the bearing stuck to the crank I thought...