traxxas t-maxx

So after talking about 100% aluminum tmaxx i ended up wanting to put together a big rig. Got the body (f 650) and got the wheels 6 1/2ish and there offset a lil to give a wider stance. Now i need a chassi. Would the 3.3 chassis fit the f650 body? I'm looking to line up the center of the...

Hi everyone, I've been out of the RC scene for a while(read 3-4 years). So I decided to resurrect my tmaxx and after cleaning up the engine, i have got it to start. However, when I turn on the power, the only thing that happens is a red light on the optidrive. I remember that the servos used to...

So i recently replaced all four corners on my tmaxxs arms but i dont know if they are the right parts. they slide back and forth approx. 2 mm. I'm ordering bumpers, tank gaurd, braces on the underside of the frame. the bulkheads dont seem to fit for some reason i dont understand. should i...

i want to build my 95% stock tmaxx 3.3 into a monster truck that can go fast down the road and do some crawling. i want to be able to jump in water or mud ( whichever is in the direction I'm going) and continue driving.. what upgrades should i do for what i mentioned, and what upgrades should i...

Does anyone know a part number for a FOC for a #4909 maxx trans. Or what FOC fits it. I have a new one I have never used and want to put it in the old maxx that I beat on a lot.

Well I really beat the crap out of the old maxx today and she finally broke. I blowed two rear shocks completely out, broke a rear skid plate, broke an RPM bottom a arm, prob some more stuff have not tore into her yet.

I'm thinking about doing a full aluminum tmaxx. What does the world think of this? And where is the best place to order?

Whats all needed to convert an smaxx to a tmaxx?

So yesterday wat I figured was just and bad glow plug weak starter wand and or bad starter Comes to find out the connecting road is split and snapped off the piston:( Ran perfectly fine then it automatically just stalled and that was it What are my options I wanted to replace just the con...

Hey guys. I'm new to nitro and I'm having glow plug issues. I burnt one out yesterday just driving up and down my street. I bought a new one put it in ran it for 5 or 10 minutes and blew a brand new one. I really dont know what's happening. If any one has any info, please let me know. Thanks

I've been eyeing on the crowd pleazer and slipstream for revo but didnt find a clear answer on how they fit and mods for it..i came across the s maxx clear body on a random post and was wondering if this will fit on my t maxx 2.5 chassis with a 3.3 in it? i really trying to get a truggy stadium...

So what whould be needed to make a smaxx to tmaxx. Diff, axles, driveshaft and front axle carriers? How about the imput shaft from the trans?

Does anyone know if the FOC for the #4907 trans will fit a #4909 maxx trans

My tmaxx wont start the light on starter box for glow plug wont light up i changed glow plug got new starter box and wire harness and plug still wont glow wat could be wrong

The end of June I will be buying a new engine for my wide Maxx. Still not made up my mine yet. Can anyone list all the direct drop in engines and the ones that just take a small amount of work and parts to install. I have heard the bearings in the Dyn 2 .19 wear out fast. If so how much...

Spring is here and the dirt area right by my house is nice and dry now for bashing..here is a short vid of todays bash.. full vid is on my youtube channel... http://s1269.photobucket.com/user/nitrorc40/media/tmaxx%202-5%20rolling%20chassis%20build/04-28-2013_114814.mp4.html running short 2.5...

I'm curious what I would need to do to be able to convert my Tmaxx to electric. It's been in the back of my head for a while now and after seeing how my friends e-pede goes with a titan 550 and a 8.4v 5000mah nimh I kinda want a 4wd electric. And plus, sometimes I would like to just be able to...

http://www.ebay.com/itm/281099090629?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

I thought now would be a good time to resurrect and old friend of mine. I built this chassis setup a few years ago with the intention on installing the HPI gas engine that has not been released yet (if ever). I ran it initially to test it out with a XTM 457 for about ½ gallon and then...