traxxas stampede

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

  1. B

    Sold / Found Stampede 4x4 rtr or roller

    Looking for a stampede 4x4 RTR or roller
  2. WoodiE

    1966 Ford F-100 body for Traxxas Stampede from Proline Racing

    If you've got a Traxxas Stampede and love classic trucks then Proline Racing has a new body for you, the 1966 Ford F-100 truck body! The 1966 Ford F-100 body comes with classic details like step-sides and huge fender flares. Just like the Ford of 1966, Proline Racing makes this body right here...
  3. K

    stampede wont stay running

    i have a nitro 2.5r stampede traxxas i will put the glow plug in and it will start after a couple of pulls it usely starts on the first and it is hard to pull once i got it started i will take the glow plug ignitor out and it stop running it just shuts off please help
  4. K

    traxxas nitro stampede

    so i want my pede to run off road basher but right now it sits too low and the tire barly get any grip in grass so where should i start?
  5. ktm654b

    Traxxas stampede vxl over heating issue

    I have a traxxas stamped vxl 2? wheel drive with the velineon 3500 motor and the vxl-3s esc. I am running a 5000 3 cell lipo battery pack. My stock gears are a 90 tooth spur gear and a 19 tooth pinion gear. I was running a 30 tooth pinion gear with a 86 tooth spur gear and I ended up burning up...
  6. goodgamer

    Converting brushed to brushless (Stampede)

    I have a Traxxas Stampede I got through a trade. It was brushed and NiMh I only had boring old batteries. So I took my brushless sensorless motor (Reedy 3300Kv) that was on my SC10 and put it on my Stampede. The results were amazing it did wheelies on command and zipped around pretty good. I...
  7. R

    Traxxas nitro stampede .15 help needed

    I have got one of the older versions of the nitro stampede with the .15 motor. My son was out driving it the other day and everything was just fine until it died on him. I went to go start it back up and every time i would try to start it the back wheels would turn as well. Seems like something...
  8. SchrodeMode

    Sold / Found Motor/ESC for Stampede

    I'm picking up a new Monster Mutt roller for my daughter and am looking for a motor and ESC combo. I'll even entertain some fried Traxxas systems (if the price is right), I've got a few cracked engines and a fried ESC that I'll be sending in. Let me know what you've got.
  9. J

    nitro stampede help

    Hi, I Am New To The Nitro World And Just Bought A Nitro Stampede I Researched tunning And I Think It's Tuned Right It Runs Good Doesn't Stall Or Anything But The Guy At The Hobby Shop Said That Once It's Tuned It Would Do All Types Of Wheelies And Go Over 30 Mph Well It's Deff NotDoing Any...
  10. andydrew39219

    Wider wheelbase for stampede

    I have been thinking that I should probably widen the wheelbase of my stampede a little bit with the 2.5R in it. I just remember how easy it is to flip and cartwheel the stampede, especially turning around in the street. And when I was driving my tmaxx around it was like it was glued to the...
  11. andydrew39219

    To all Stampede owners (elec may apply)

    First off to make this clear, I do not know if this applies to the electric stampedes, although I would not be surprised. Ok, my 3910 Nitro stampede came with collars (I believe they are called) installed in both rear axle carriers in place of ball bearings. They are just doughnut shaped...
  12. T

    3.3 stampede gearing

    What are the options for gearing on a stampede with the 3.3 engine i got this truck running and broke in,but i had to use the clutch off of the pro.15because the gears wouldnt mesh right using. The larger clutch bell from a 2.5/3 .3 what spur gear will fit on the diff of the stampede where u...
  13. andydrew39219

    Traxxas Stampede

    Hello, I bet you guys never thought I'd be posting here. But it seems that a friend of mine would like me to find him some good batteries for his Stampede. I don't know part numbers, but I can tell you this. It's one of the older 2WD electric pede's. Titan 12T 550, XL5 esc. Not 100% sure if...
  14. A

    Upgrade for Stampede 4x4 (motor)

    Will this combo fit into the Stampede 4x4 without modifications / or addational hardware; and will i be able to use my stock radio reciver ? Or do I need anouther one as well? thanks...
  15. theant

    Xl5 stampede batteries

    Hey guys. I am wondering what is the difference between a 7.2 volt and an 8.4 volt battery both supplying 4600 mah. Is it that the voltage is the amount the battery can store and the mah is the speed in which the current is supplied. This is a very basic electrical question, i know, but i am...
  16. batmanninja

    just got a stampede

    Just got this today n i need to know about how it works. Trade used came with 2 bats. They r charging now. I had one with a lil charge in it n i tried running it. Response is ultra slow. Low battery?? The lil box on it is xp digital sc200 any help would b great
  17. andydrew39219

    Took out the stampede today, and crashed

    Haven't been able to run it for a while due to weather and I got a chance today. Got it tuned and running, about 10 minutes in it started going half off the road, I tried to get it back on the road but it wouldn't go and I ended up hitting a large wooden flower pot on the side of the road. I...
  18. Chevytmaxx

    Brand new nitro stampede

    My buddy got a brand new traxxas stampede, which I know nothing about and it won't turn. It's only 2wd which thought its jus cuz the front end raisin up the front wheels. We put a little bit of weight in front and still doesn't want to turn. Could be servos, camber, or wat?
  19. A

    Stampede 4x4 steering parts

    Do you guys think that this part will work with the Sampede 4x4 vxl, I keep snapping the drag link, and think this would be a good fix. However it says fits slash 4x4, but the part number 6845 is the same for the stampede 4x4...
  20. WoodiE

    T-Bone Racing Traxxas Stampede 4X4 Front Bumper Review

    The stock Traxxas Stampede 4x4 bumper is a little high and a bit narrow and after a number of upgrades to my Stampede 4x4 it left a bit to be desired. That's where T-Bone Racing comes in, remembering how well the T-Bone Racing Mini-Revo front bumper worked I decided to checked to see if T-Bone...
Back
Top