picco

Hey guys, well I have a picco, its the same one that comes in the schumacher fusion on road, the problem is this one has n big squarish heatsink, not round like most others I've seen, can anybody tell me more about this specicfic motor,or is it just the heatsinks that differ? Thanks!

can't figure out why my picco is overheating. is it to lean? am i supposed to be richening the hsn?

This was originally a 2.5 Revo and it does have the short chassis, everything is in good working condition unless noted below. Axial 2.4 2ch TX/RX Steering and throttle servo's are Traxxas 2075's Single steering with proline aluminum arm and saver THS pipe and header Picco max .26 with just...

I had a GO 2047 on my picco .28 team turbo motor in my revo, pipe performed well enough. It got dented real bad a few weeks ago, the wierd thing is I put it back on with a massive dent in it & it picked up a noticable amount of power. I tried a borrowed 086 on it - was terrible, dropped a...

Hey guys I am having issues with my picco .26 carb slide sticking. I believe the o ring is damaged and binding up. Anyone know where to find just orings for that? or ones that will work?

Hi all, help all!! Having blown the 2.5r motor in my Revo I had the chance of a used piccob26 max which I have read about as a great upgrade. Having managing to obtain a picco engine mount I stripped the motor and all looked very good. Compression felt a lot better than my trx 2.5 and I...

Just thought I'd throw up some pics and specs of a maxx I recently finished. It's a 4910 pro .15. I kept the stock chassis length and width. It's a wheelie machine Powerhouse -.26 picco red dot. Modded by AB mods -OFNA 086 BB pipe and BB header Drivetrain - RRP slipper -RRP...

Was running today to tune and I was getting in the 280s as far as temps. When I ran it few weeks ago never got close to that although it was 20 degrees cooler. It was running like it needed to be leaned out more. The fuel might be a little old would that have any bearing?

Hey guys i recieved my new picco today and got it all sealed and fitted in my revo. I was reading about the needle settings and it says Set needle to flush. Now is that flush with the outside of the pivot ball arm on the carb? Seems kinda weird it would be 3-3.5 turns out but thats what it works...

Hey guys, had my eye on a picco .26 max for a while. Nothing wrong with the 3.3 as it goes quite hard and consistent for me in my 4908, I just want bigger..:) Can you guys shoot me some suggestions as to what other parts will need to be beefed up if I go the max option? I already have two...

Hey guys, I need to know if anyone knows the part # of a good header that I can use for my Classic T-MAXX.. I have searched online, and found some, but the header looks small.. The Truck I got from my brother and he doesn't know where he found this one. I took it to the hobby shop and that guy...

So while shopping I'm gonna new CB and clutch system and replace the spur also. So I'm looking for a real good gear setup for my revo with the picco engine? And also i was looking at this clutch setup wondering if its a real good part. I'm actually looking for pretty stiff springes,which i would...

So I'm about to place a nice order, two piccos a tekno wing mount and wing and a few other odds and ends. So why is the ofna mount not recomended? And which mount is recomended? Thanks

I'm having a hard time fitting my .26 RD to my thunder chassis Lookin at the picco .28. What type/size clutch and flywheel do I need? Also will the picco accept a mod 0.8 CB?

How's everybody? I just bought a Kyosho Inferno 7.5 Sport,and the engine is locked up.I plan on learning and trying my hand at racing.The buggy is already built for racing from front to back I don't think theres a stock part on the chassis except maybe the fuel tank.My questions are will a OFNA...

I've got a maxx 4910 2.5 I'm thinkin about puttin a picco maxx .26 on not sure if i wanna spend the money to do it or not yet. i know its gonna need some driveline upgrades. I'm planning on doing a extended chassis upgrade and puttin a new forward only tranny from the 4907 max. I've been told the...

Should I go ahead and put this Boca front bearing in my Picco that I have or just wait until the stock bearing goes bad? Theres nothing wrong with the stock bearing and the engine is fairly new. Also does the Picco P3 .28 use standard or turbo plugs? My understanding is that it uses standard by...

Just wondering has anyone run a .18 Picco diablo engine before. I found a good deal on engine and pipe combo for a maxx truck. Whats power like compared to the sirio .18 and the Os .18 engines.

have a T-Maxx with a Picco Max .21 motor and need a good replacement manifold and pipe.I was running it and all of a sudden it got loud.When I looked at it the manifold was just hanging there and I don't know how it was attached to the motor.I just got this truck and didn't look at that part.I...

i got a revo with maxx 26 and i need to get a pull start it had a roto start on it but it didnt come with a starter but I'm wanting to get rid of that i read somewhere that you needed to get a new owb to convert to a pull start