lipo

I'm lookin at getting a new set of lipos wich would be better venom 3s 5000mah 50c continuous 250A or venom 3s 7500mah 30c continuous 250amps i've got a mamba monster set up thanks guys

Looking for 2 or 3 2s 4000+Mah Lipo packs that is the same size or smaller that a 6v NiMH/NiCAD pack for my Wraith. Not looking for beat up packs & not looking to spend an arm and leg for them, please list what you have.

i have a question about lipo chargers. i have 2 chargers the first one is a cellpro 4s which i have had for awhile and the other is a venom pro charger that i got from someone. why do some chargers only use the balance taps to charge and others use the balance taps and power leads. the...

Hey, everyone I just bought two 5.8 amp turnigy 2 cell lipos for my savge flux. On the back they say "do not exceed 5c charge rate". From my limited understanding of the "c" rating am I to believe I can charge these batteries at a maximum of 29 amps? 5.8 amp battery X 5c charge rate = 29...

so bought this not even a week ago to run on my ezrun system but now the esc is fried i have no funds to replace it and going to stick with 2s i paid £55 plus £3.50 for them to solder a deans on bought it from here...

I'm new to LiPo's and have a vehicle that is 2s lipo and 3s lipo capable. What I'm wondering is what is the difference between the 2? Does one make the vehicle faster or run longer? Also, what does the "mah" on a battery stand for and what is its effect to a battery? Thanks in advance for any help.

Not getting many hits with help on the mini page so I'm hoping I can have better luck on tis forum. Just purchased the mini summit, should be here early next week. I'm curious to know if you have to actually break the electric motors in like you do a nitro and if so, how do you break them in? I...

i was running my jammin x1 truggy and my car died so i thought it was the voltage cutoff on my tekin rx8 when i went to carge it it kept saying S 3ser R 4ser its saying i have a 3 cell lipo instead of a 4 cell whats rong and is my batt fried pleassseee help trying to race this weekend for the...

I've ran my Flux HP through a couple sets of lipos and holy moley that thing is insanely powerful.:whhooo: Powerful enough to literally shred the inside of the rims! I put a set of my beadlockers on there and it tore the tires to shreds. Admittedly the rubber was a bit old. What's a good...

I'm looking to move to brushless & lipo and want to get started with decent equipment. I don't want the best race level stuff, just really decent stuff that will survive a while. What Lipo batteries have you had good luck with? What charging system do you prefer? I'm running an eRevo...

1000mah never cycled, 30 shipped. all are still in the box. I can text or email pics.

i have a slash 4x4 and bought 11.1v 3 cell 30s 5000mah lipos and 19t pinion gear. is this a good set up for the slash vxl?

i just got a jammin x1 crt with the tekin rx8 and I'm going to race this truggy so if any one could help me out with maby 2 lipos and a charger under $175 that will be sweet and i no the lipos can get up there in the price range

Hey Guys, A few weeks back I ordered a couple of 2S lipos and a new hyperion 720i duo charger. The packs I have 5000 mah 50C 2S 7.4v hard case Lipo packs. The packs shipped with a store charge on them. I thought I would be able to figure out how to charge them... but I am having some...

As the title says- 75% or better- Medium to soft compounds- AKA-Losi-Proline-J Concepts Calibers-Grid Irons- Double D's- Hole Shots- Bow Ties ALSO- A Good shape well balanced and maintained 4s-4500- 40c+ Lipo

Help i need an answer fast, what voltage should i set my esc at with the program card if it is a 4100mah 2s 7.4v lipo. should i set it at 6v?, or shoult i set it at 3.2v? What I'm not sure about is does it shut off when both sells reach 6v together, or is it when ONE sell reaches 3.2v? Anyway...

Okay, so when I started buying these packs for my XR10, they were AWESOME! Great run times & power. Picked up a 5500 2s gensacearespammers for my SCT and was low voltage right off the bat, returned it for an exchange, during the exchange process I ordered 2 more 5500 2s from HobbyPartz and right off the...

I'm getting some small lipos for my merv and want to run them in parallel. Should I charge them in parallel? And what do I need. I have an electicfly lipo charger. My charger will handle up to 6s. And I will have 2 2s and 2 3s packs.

Hey Guys, I am looking to go LiPo. This is what I currently own as far as electronics... Team Checkpoint TC1030 charger Most of my ESC's are Novak GTB, Havok and HV speed controls. To make the change, what do I still need to purchase and have before I go in this direction? I am not only...

I'll be needing a new charger to handle a 6S battery for the big heli. Any opinions on this one, or any suggestions for another one? http://www.hobbypartz.com/skychb6chdup.html