RPM has designed a new ESC cage for the Traxxas Slash short course trucks that's been designed to accommodate the Castle Sidewinder 3 and Sidewinder SCT electronic speed controllers and can be used with or without a ESC fan. The RPM ESC case has also been designed with air channels along both...
Does anyone know of a way I can trouble shoot my vlx 3s to determine if it's ok? Seems to be very glitchy in the throttle? it's not the servo and I have installed a glitch buster....
Thanks
I recently received a new ESC after sending in my old one that fried. After installation the ESC doesn't want to calibrate. So at the moment my transmitter wheel is controlling the throttle and the trigger controls the steering. I have the castle link system so I reset the settings back to...
B4.2: LRP spx zero ESC, Reedy Sonic 17.5 motor, savox digital 4096
Tools not included.
IN spares I have
F/R arms
Ball diff
slipper pads
Front shock tower
pinions
spur gears
some bearings and more.
I am asking for $175 for THe associated items.
I can make it RTR with Tx, Rx...
OK I think I'm down to gearing issues and doing a double check with the grand wizards here. I dropped my brake curve and EPA down to almost nothing 15% and that helped stop overheating a little. I have a hobbywing ESC (forget model I'm at work..SHHHH) and an older novak 4.5 motor with 4s Lipo (2...
I had this in my 4x4 slash and it ripped on a 2S lipo. Runs cool and is nearly as smooth as the Tekin Pro4 setup that replaced it. It's used but in great shape.
ESC is the DYN4850 - water proof, 70A and up to 3S. - 70 shipped
Motor is the DYN4950 - 3900kv 4 pole with a 5mm shaft. - 65...
so i was looking at a rtr rc10b4.2 and it comes with the AE SL500-bl esc with a reedy 540 3300-r kv motor. I want to step up and go with the AE SL-700-bl and a reedy 540 4900kv motor. Now will this work as far as fitting and not going past what the esc calls for? I did look at the specs i think...
I burnt out my Turnigy 80a waterproof ESC on my SC10 by plugging my leads in backwards on my battery, noob mistake. But I have been a fan of there ESC's and want to try a new one.
I have a 5000kv motor on it with stock gearing, what should I change with that for speed or torque. I am planning...
Ok, I need to pick the brains of the more experienced again. I have a programming card for my ESC that hooks up via the lead wire that goes to the receiver. I have my receiver in a water tight box and it is a pain to get into it on the fly if I want to tune the truck different and etc. my...
2 3800 kv 40.00 each
1 7700kv 35.00
Pinions not included.
1 castle MMP 70.00
2 castle sidewinder SCT series,1 with fan and one without 45.00 each
all still have switches and bullets for motor connections.
Prices are OBO please add 5.00 for shipping.
I need an esc for my rustler, I want to reliably run 3s batteries.
Lots of stuff to trade, ps3 games, ps2 games, tmaxx stuff, 4tec stuff, what U looking for
I'm building a wraith kit and was hoping for some help picking a brushless setup that will run well on 3s LiPo... I've been eying the novak combos; 13.5T wraith, Timbuk 2 18.5T, Crusher 18.5T & 21.5T.
I'm not looking to go real fast I have a savage for that. I guess I'm looking for reliability...
Ok so here is the Breakdown!! I got the Axial wraith about two weeks ago, along with 2 Venom 4000mAh 2's I did the battery relocation and but the esc in the passenger floorboard. I have only ran it a couple times for a small period of time about 10 min each time. I stripped my stock servo horn...
Like the title states I'm looking for the stock reedy 3300kv motor and stock esc for the sc10rs. Need to slow it down for the wife. Let me know what you got. Thanks!
Okay, I know I know this but cannot access brain correctly apparently, so..
On the ccmm2, wiring the Esc the wires by color should be red-black-white from the left to the right. Correct?
I can't figure out why I don't remember this. I googled many pics and it seems everyone puts them...
Hey guys. I have a sc10rs. I have been threw a few motors just trying to get the speed I was looking for. A lot of rpm products, and a few other hop-ups. I ended up running a fuse motor esc combo. First couple of minutes running, the esc burns up. I am running a 6700kv motor and I have been out...
Velineon waterproof vxl-3s up for grabs got it in my stampede but its too much power for what i want and went brushed. $120 shipped
Some of you know I'm getting in to racing 1/8 nitro buggys so I'm open to trades as well.
All in good like new working order.
I've been having a slash roller for a while now and I've never got around to buying the esc and motor for it
my question is what is the best bang for your buck setup i was look at the sct castle creations kit its a little over 100 off ebay but i want to be able to run the 3s lipo that already...