Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

  1. F.R.S. Ninja_007

    NEW Traxxas BL-2s Brushless System

    Just found this a minute ago in my email, looks like @DavidB1126 & @luke66 were right It goes around the same speed as a stock brushed system at ~30mph, and you’re looking at $329.95
  2. luke66

    Luke's Rustler MM (mid motor)

    i just couldnt wait! this is my mid motor rustler build, kinda inspired by @JCsRCcar. the chassis only costed me 10$ I've gotten pretty far. i have the tranny mounted along with most of the front end. got some pics: the heatsink is a little sloppy. i still have to get a upper chassis plate and...
  3. J

    SMT 10 brushless motor heat

    I recently upgraded my axial SMT 10 gravedigger from brushed to brushless and am experiencing more motor heat than expected. I went with a hobbywing sensored combo with a 3300kv motor and 80a esc. I kept the stock gearing of a 14t pinion as I didn’t want much speed out of this truck, mainly more...
  4. G

    What model is this?

    New to losi and I am having a hard time identifying this model. I thought it was a losi mini T 1.0 but the chassis looks too narrow… any thoughts? I know its old and thats about it. Id like to go brushless if I can but I want to make sure I order spare parts for when things start to break...
  5. Lukedavis

    Snow trucks opinion

    What are your guyses opinions on driving RC trucks in the snow? I love to but I can only do it for a little while because my electronics are water-resistant. Its still very fun though! Also, what is your rig for if you play in the snow?
  6. coldvod

    Crawler/ rock bouncer brushlesss setup recommendations

    I'm making a rock crawler and I want a good mix of speed and low end torque I already own 2 crawlers ( tf2, scx10 2 ) so I don't want a fully crawler focused setup ( torque with little to no speed ) more of a rock bouncer. I would like to stay under 250CAD# I was thinking of the Mamba Micro X...
  7. JCsRCcar

    For Sale SPEKTRUM FIRMA 2050KV BRUSHLESS motor and Firma 150 Amp Brushless SMART ESC 3S - 6S

    Spectrum Firma 4074 2050KV Brushless motor, ARA8611V5 new never used asking $45 shipped Spectrum Firma 150 Amp Brushless SMART ESC 3S - 6S New never used asking $80 shipped. $120 shipped for both. Again, these are new, not used. All included shipping within the continental 48 states.
  8. RC Guy

    ⛄RC Brushless Truggy | Snow Fun (3S Lipo Battery) ?

    Had a blast yesterday with my R/C truggy on the 3s Lipo :):thumbs-up:
  9. Guillaume

    Converting the Kyosho MP10T to Brushless

    Hello Everyone, I am a big Kyosho fan and I have recently acquired the MP10T and finished to convert it to Brushless/Electric. Even though the conversion process is quite smooth and easy there are a few little things that are good to be aware of before starting. I have made a short tutorial...
  10. The RC Car

    Motor upgrade!

    Hey, y'all! I looking into upgrading my Venileon 3500brushless, is there any motor that y'all would suggest? I would want it to be a 540 or 550 base, and I would also like to not break the bank! I heard that goolrc's motors are actually reliable even though the rest of their stuff is trash. a...
  11. Ryanmo

    Sensored esc/ motor

    Hello noob here I’m building a Tamiya to-02 rr chassis or I will be once I figure this out. I’ve decided I want a sensored brushless motor around 10 to 14 t I think.... what esc and motor combo would you guys recommend I’m getting confused looking any help would be appreciated
  12. Roanoke RC group

    Which brushless 4s ESC???

    I am buying an ESC for my 1/10 4x4 but I don't know which one to go with. I want to buy the Hobbywing SC8, but I also found the Hobbyking X-car 60a (2s-4s) brushless ESC. I only want a cheap ESC that is easily programmable and can take 4s. Would it be worth spending the extra money on the SC8? I...
  13. A

    Brushless setup for reliable hot weather bashing?

    I have an old Rustler XL-5 that my son has become comfortable enough with that I'd like to upgrade the motor and REC to make it more interesting. I live in East Texas so it can get ridiculously hot. I'm not looking to set land speed records. A legitimate 40mph is sufficient. My primary...
  14. B

    Mgt brushless conversion

    So I seen a few brushless mgts here and have watched a bunch of videos. Has anyone done it and what exactly do I need? I’m thinking of doing one. I def prefer to do it like a 1/8 scale buggy diff and get rid of the trans.
  15. WoodiE

    Losi Tenacity-DB 4WD desert buggy

    Losi Tenacity-DB 4WD desert buggy Continue reading the full article
  16. batmanninja

    Super cheap nitro to electric conversion

    25 bux and i converted my losi xxxnt nitro to brushed...also i am converting HPI nitro mt to brushless.
  17. Meowzz

    Losi 8ight 1.0 brushless conversion.

    Hey, hello. I have my losi 8ight 1.0 to be converted into electric. I have been looking around and can't seem to find a conversion kit for it other than the rc product design, which I can't seem to find anywhere. And I don't want to waste money on a tekno conversion kit. I currently have the car...
  18. bifft it

    suggestions for re-powering a Flux

    Bought my Flux off another Rc site a few years ago. it had quite a few upgrades to include a Tekin Rx8/T8 motor/ESC have not ran it in a couple years and tried to do so a few weeks ago and it let out a sound like grinding gears. took it out to test and it seems the motor is probably fried. when...
  19. olds97_lss

    e-revo section? Info for a e-newbie...

    Is there a separate e-revo section I'm not seeing? Pretty certain I'll be getting one for Christmas... unless life takes a hard turn. I don't usually pay for new retail, but figured my first big foray into electric, it might be a good idea. Just thought I'd try and see what issues/upgrades may...
  20. WoodiE

    RPM X-Maxx Rear Bumper Mount and Wheelie Bar

    RPM has some great news for all you Traxxas X-Maxx owners, coming soon RPM will have a Rear Bumper Mount and Low Visibility Wheelie Bar made for the Traxxas X-Maxx. The RPM X-Maxx rear bumper mount is beefy similar to a skid plate with the durability and flexibility to help absorb rear impacts...