axle

are there any tricks to getting the 4 way pins installed into the end of the drive shafts on a 2.5? thanks,

ok I got a .15 maxx with a 2.5 integy chassis and i wanna add the rpm true track arm conversion, I'm sure my axles wont work with them coz they are the narrow ones... so could i drop in a set of 3.3 axles? what else would I need 2 perform this, would that get me the most bang for the buck on a...

I've been thinking about getting an Axial SCX10 for a while now, however in the last few days I've been looking on RC4WD and noticed the T-Rex 60 axles that look just amazing and so much like a scale axle. I also like the fact you can change the diff cover to a number of other styles to your...

i am looking to buy an assembled rear strait axial axle. it can be locked or unlocked it doesn't matter to me! either with the stock housing or with an aluminum housing i am also looking for an integy aluminum Y link i only need one color does not matter at all as i can easily get it anodized...

So i was out bashing up and down the street, some stupid little kid (9y/old) was trying to jump in front of my revo going approx. 40mph. I applied the brake and steered around him and hit the curb. Nothing really bad just everytime it bumps a curb or a tree stump my backyard the pivot ball pops...

I was running my car last night. Ran fine for about 3 tanks. Then I went off a little 2 ft jump and broke my rear drive shaft- Where it connects to the pivot thing by the differential. Once I fixed that i ran it around a little making sure everything else ran fine. It ran fine. Then i was...

coming soon is rc4wd's Renegade axles with lockable diffs. they look pretty good imo. cool feature for a scaler, run it in 2wd till you can't make it any farther then lock her in! check em out. http://rc4wdstore.com/product_info.php?products_id=975 Renegade Axle specs: * CNC machined...

just got done installing a rear spool on my 2.5 tmaxx, during a normal bashing i broke both rear axles less than 15 mins later, my question is are the revo spec axles from a tmaxx 3.3 a direct swap and will they handle the extra stress, or should i invest in metal cvd axles? i plan on gearing it...

looking for one WK axle. need one for a Trophy Truck build I'm doing.

http://rc4wdstore.com/product_info.php?cPath=60&products_id=846 haven't heard much of these, any good? compared to the bergs?

Hi guys. I was looking at the Hot Racing power axles for the Scorpion. They look good but dont know much about Hot Racing. I was wondering if there is much needed to fit the Berg axles to the AX10, because the price works out around the same! Any info much appreciated! :)

:whhooo: :whhooo: :whhooo: :whhooo: So, i put a spool in my t-maxx. I have gone thru 4 rear axles in 10 minutes of run time. Checking them during the first couple minutes, they are twisting apart at the end that is nearest the differential. Could it be just the spool? The first...

I am having one heck of a time with my axles. I lost my front wheel drive and am now trying to set the cups so the axle dogbone stays in. BUt even when the cup is as far toward the dogbone as I can make it, the axle still slips out. Is there a reason they are so short? There is plenty of...

Hot Racing AX10 Replacement Axles initial review Factory information and specs: Black or silver On board power axle kit ax10 This is the optional Aluminum Front or Rear Low CG Transmission for the AX10 FEATURES: • - CNC 6061-T6 Aluminum construction, Black in color • - Nitriding Steel...

I got a HPI RS4 EVO3 w/ O.S. CV-R .18 almost every time i run this thing i break and axle. Are there any companies that make stronger axle's. the one's i keep getting are OE HPI axle's I usually break one of my outter ones which are from the diff. to the wheel. but in this last week i broke...

Hey guys if you have a spare stock drive axle for the x layin around I could use it I bent the crap out of one of mine and i dont have the money to upgrade right now. I also need a new one way bearing if you guys happen to have one. Thanks! EDIT: I just realized I think i called it the...

I need JATO 3.3 AXLES HALF SHAFTS thanks Wayne

Any tips on getting axles apart? The screw got loose so I need to screw it back on and and add some threadlock, but any ideas how to get these apart? I can't get this one part off the middle ball part.

HPI has released a super heavy duty drive shaft and axle set which will upgrade the Savage X family rc monster trucks to the same ultra-strong outdrives and dogbones found on the new HPI Savage XL R/C monster truck. The extra-thick steel dogbones deliver the durability you need for massive...

So on the traxxas carrier for tmaxx, the turnbuckle/hollow ball.. it mounts between a couple "ledges". The rpm carrier only has one mounting ledge. Does the turnbuckle mount directly to it or what?