does anyone know what the factory settting is for the adjustment screw on the clutch is? Ever since i picked up the 3.3 transmission i could never get the truck to shift properly, sometimes it would shift sometimes not and since i just had to pick up a couple new gears i would like to bring it...
What exactly does this do? Is it to change the transmition from a nitro to work with a brushless or is it to make a E-Revo into a two speed or single... what exactly is it for? Btw, sorry to sound like an idiot but the specifics on amazon ain't helping.
can someone tell me the ideal settings for low speed needle and high speed needle from fully closed position?
i have ran in my buggy but now it seems to be running slow.
also wats the go with the disc break? does it even work, my buggy cuts out when i push forward on the trigger. is this...
I used it in my Savage for about 1/2 gallon until i ordered the 3 speed transmission. Transmission was working perfectly when removed and has been sitting in the house ever since so there shouldnt be a problem with it. If you have your engine tuned correctly the shift point should be dead on...
hey all, i gota gv cage nitro a few months back and its my first rc car I've ever owned. i noticed that the gear box is locking up and the wheels wont turn at all so i took it apart and the gearbox seemed fine, also it runs fine with only rear wheel drive, but is impossible to control. the front...
I just finished breaking in the truck and out of the box the tranny shifts on the late side. According to the directions it says to have to black screw exposed and adjust accordingly. I tried to get the black screw exposed but I was only able to get the gold screw exposed. Is there any trick...
So I have an Aftershock that I have been fighting for about 3 weeks....Runs and starts fine, good engine temps around 220-240 with smooth acceleration etc. However about 3 weeks ago it took a few tumbles in a grassy field and since has not been shifting at all. I installed new clutch springs...
Hello everyone, I'm new here. Just thought i would see if you could help me out. Heres the story.
I got a used Ofna Hyper One Seven, the 7th scale onroad car with 2 speed and reverse. I ran it for a while, then it sat for a while and i couldnt get it started. I took it to a shop and they...
currently own a savage xl roller and before i drop the engine in i wanted to here from some savage owners feelings on the 3 speed with over drive?
for speed purposes durability and just overall fun
after a lot of fussing and losi sending me a new owb and clutch assm, i found that re drilling the 2 speed clutch shoes so the screws can move more freely solved my answer.
Drill 2 areas as noted with Red Lines**
is it better to have a 1 speed trans or 2 speed? i heard some people say that the 2 speed is not as good because the car can sometimes get stuck is second? is this true?
at the moment my car is running on a 2 speed gearbox and there is now a metal gearbox but in single speed. If i buy it what effects would it have on the car, would it make it slower?
I've got an hpi firestorm, i know there is no 2 speed conversion kit for it but is there a way to make my own?
Please reply in plain english, i dont realy understand rc car jargon:D