Search results

^^^ Looks good!

Enjoy. It is a fun RC. Keep us updated!

Thx....pic is where I took it out. It was tight before I took it out to check it. I did clear all the gears in the rear diff and posted some pics on the other forum....sun gears show it has some bad spots. When I put it all back together it was gritty and locking again. I will order new internal...

Thx for the reply... I will look again but it looks like the screw/pin goes all way through so if it comes loose I don't see how it slips. Unless I am missing something or looking at the wrong screw.

Friend... I have a strange noise coming from the rear diff of my Losi...i believe. Look at the link I posted on the Arrma site anyone experience this and know the solution... Thx https://www.arrmaforum.com/threads/help-with-losi-db-pro-drivetrain-issue-i-think.39022/

I agree I'm in the same range as you. It took me about 2-3 hours to do tbe front. Took a little off at a time and stepped back and looked. Took pics and notes of each screw. Of the 3 diffs the rear to me was more involved since the wing cage is on the back that adds to the removal to get to the...

Here is the link Post in thread 'The unofficial Losi Tenacity DB Pro thread by Alex.M. and slick2500.' https://www.arrmaforum.com/threads/the-unofficial-losi-tenacity-db-pro-thread-by-alex-m-and-slick2500.14799/post-503674

I have the Losi DB Pro and I bought the center longer out drives for mine. I had to return them back to Amain. They were too long and when installed on the center diff I could not put the center front drive shaft on. It hit/rubbed the out drive on the diff since it is at an angle. I am on the...

You can get the original part number for the OEM out drives in the manual..they are soft. The outdrives I purchased for the diffs f/r and even the center are these...

Hi Newbie question. This application or servo is for my Losi DB Pro buggy. I replaced the stock Spektrum servo with a DS3230 30KG. The DS models I have used in all my Arrma rig and no issues. The issue I have here is that the DS3230 is too tall! well over 40+ mm in height. Being so high the...

Thx I inserted the wrong outdrives in the wrong pack for return. I have the F/R for the front/rear diffs only and bought part # LOSB3576 for the center which is longer seen in the pic. Thx for the catch I plan to return them had them in the wrong pack. Still, you answered my question. I need...

@E-fanatic and others Fam...unless I am just making a newbie error...I cannot get the outdrives to work for the center diff, see pic below. No issues with the outdrive for the f/r. Could my confusion be I am using the outdrives for the center diff that does not go to dogbones for tires? When...