Search results

Now I’m really curious.

That website in the pic is highly suspicious to me personally.

Aint it the exact opposite?

I’d have to bring it home, son would want to see it 🤣 I was wondering if I was getting some kind of rfi from the new motor on it. It was strange, with both suspect servos, running on battery power, just the front would trip out. Swapped the front to a servo that ran at 6 volt through...

It’s almost got me curious enough to bring the scope home and see if I can see what the heck is going on 😂

https://a.co/d/4CrMcd4 This is what I got and they were supposed to, they had harnesses included to do what I did 🤷‍♂️

@WickedFog i put the problem servos back in, powered them through the receiver at 6 volts and it’s fine Also a little more to the story, so I powered them the way I did because the servos came with little jumper harnesses to do basically what I replicated, but since I ditched all the factory...

It is strange, but it was working just fine before the swap, and it works fine with just the Injora servo on the front (I just disconnected the rear cause he was bummed he couldn’t drive it and he ran a couple batteries through it in the house). I may just swap the other Injora one or get a...

These batteries. I cut both connectors off and both leads soldered to xt60 plug (two reasons, one it’s what I had, two it’s what my charger is 🤣). They ramp crab servos. Swapped with the Injora one and it was fine at 6 volts But it’s weird it worked fine before with the factory motor/trans...

Home brewed

They soldered to the battery plug

I got them powered directly from the battery. It was fine with the stock motor. When I swapped the other servo I powered it through the receiver and it was fine. Kinda weird. Wondering now if I should try to power the problem servos through the receiver and see if it does it.

Didn’t take any pics, but got the two speed trans installed this weekend. After that the steering servos started tripping out, in high range only at full speed it would start going crazy. Was just the front to start, swapped it with one from the ax24, fixed the front, then the rear started...

Need to do some body trimming. Fender flares are coming off for sure. Rear bumper needs it too. Need to figure out a rear body mount as well, when I cut the rear mount out I lost the body clip spot

Will probably be it for today, he’s playing with it now 🤣. Got some lights to add, still waiting for motor/trans to come in

I even made it work 🤣 now I’ll get to fixing the electrical

Had to cut the esc mount out on the rear for the rear steer servo, now need to come up with something else.

This build along with the track is getting him more into them. I gotta admit they are a lot of fun too! So stupid me missed the part where I needed another front axle for the rear for the widening kit 🤦‍♂️🤦‍♂️🤦‍♂️ Sorry sis 🤣 Moving on

It’s fixin to get a lot cooler (I think🤷‍♂️) if he can give me a day or 2 🤣. And yeah, he had to test out the new tires the other day, and he had to try out the new radio today.

I hope my son doesn’t see this 🤣